Hi to everybody who's reading this,
today in the afternoon I faced a strange issue on the AP. Whil flying form LKHV to EDTY all of a sudden (mid of the trip) I was not able any longer to activate my AP. Although it worked well before it suddenly stopped. I can press the AP button for .25 sec than very briefly the ROL an VS sign appears, followed by blinking 5 times the AP sign and that's it. The Auto pilot fell asleep. Can repeat this x-times with no change.
Can pls anyone tell my what went wrong?
Heinz
KAP 140 doesn't work anylonger
Re: KAP 140 doesn't work anylonger
Hi Heinz,
Did you check the AP circuit breaker? It might have popped out.
If not try to reload the sim and the aircraft and see if it will appear again, probably it was a glitch.
Cheerz,
Vladi
Did you check the AP circuit breaker? It might have popped out.
If not try to reload the sim and the aircraft and see if it will appear again, probably it was a glitch.
Cheerz,
Vladi
Bonanza, Skylane, Skyhawk, Cherokee, Cub, Texan, Mustang, Warhawk, Spitfire, Flying Fortress
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: KAP 140 doesn't work anylonger
Hello Heinz,
Something else to check is that you don't have any hardware connected which is sending a disconnect signal to the autopilot. For example, a pitch trim axis which was a bit noisy would be one possible explanation for the autopilot failing to engage.
Also, as Vladi says, have you confirmed if reloading the flight resolves the issue? We always recommend to keep a default aircraft for the default flight to minimise the risk of loading errors.
Finally, please can you let us know which host sim you're using.
Thanks,
Nick
Something else to check is that you don't have any hardware connected which is sending a disconnect signal to the autopilot. For example, a pitch trim axis which was a bit noisy would be one possible explanation for the autopilot failing to engage.
Also, as Vladi says, have you confirmed if reloading the flight resolves the issue? We always recommend to keep a default aircraft for the default flight to minimise the risk of loading errors.
Finally, please can you let us know which host sim you're using.
Thanks,
Nick
Re: KAP 140 doesn't work anylonger
Hi Nick and Vladi,
the circuit breaker was fine, also reloaded teh sim, even more I fully reinstall the aircraft, no success, but this was alread before the post. Teh solution dropped out with the idea of Nick, I had an interference with my Brunner Yoke which I didn't recognized. Great guys thx for your quick response and great support.
Heinz
the circuit breaker was fine, also reloaded teh sim, even more I fully reinstall the aircraft, no success, but this was alread before the post. Teh solution dropped out with the idea of Nick, I had an interference with my Brunner Yoke which I didn't recognized. Great guys thx for your quick response and great support.
Heinz
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: KAP 140 doesn't work anylonger
You're welcome Heinz and thanks for the update. Good to hear you've resolved the issue.
Best regards,
Nick
Best regards,
Nick
Who is online
Users browsing this forum: No registered users and 40 guests