Hello
I have used the latest accusim updater still the same problem also on the C172...
Controls Saitek Pro Flight Yoke and CH Peddals.
Also use P3D 4.2 !
Skylane no nosewheel steering
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33313
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Skylane no nosewheel steering
Hello Dave,
when you run the latest updater did you download the latest and run it and did it complete OK?
Next up, are the controls all mapped OK in the sim and if the aircraft itself OK in the sim regarding no maintenance issues and all good during the pre-flight checks?
thanks,
Lewis
when you run the latest updater did you download the latest and run it and did it complete OK?
Next up, are the controls all mapped OK in the sim and if the aircraft itself OK in the sim regarding no maintenance issues and all good during the pre-flight checks?
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Re: Skylane no nosewheel steering
Hello Lewis!
I have installed the latest updater 10_12_17... If i open and execute the installer the install duration is very short about 2 sec. but the install finished with success dialog...
I think the short install duration is normal?
Yes the Aircraft maintenance is ok also the and the preflight checks, Controls mapped ok...
The rudder on the aircraft works and in the cockpit the peddals moving... I can´t turn on taxi left or right but with diff break the nosewheel turns a little bit but you can´t turn...
It seems look as the nosewheel was disconnected from the aircraft...
I have installed the latest updater 10_12_17... If i open and execute the installer the install duration is very short about 2 sec. but the install finished with success dialog...
I think the short install duration is normal?
Yes the Aircraft maintenance is ok also the and the preflight checks, Controls mapped ok...
The rudder on the aircraft works and in the cockpit the peddals moving... I can´t turn on taxi left or right but with diff break the nosewheel turns a little bit but you can´t turn...
It seems look as the nosewheel was disconnected from the aircraft...
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33313
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Skylane no nosewheel steering
Hello,
How did you update P3D?
How are your controls mapped?
How are you loading the flight?
thanks,
Lewis - A2A
How did you update P3D?
How are your controls mapped?
How are you loading the flight?
thanks,
Lewis - A2A
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Re: Skylane no nosewheel steering
I uninstalled the client and contend from P3d 4.0 and installed the client and contend from p3d 4.2
The controls sensitivity sliders are full right and the null zone is full left
I load the aircraft from the menu dialog ( starting screen) in the p3d...
The controls sensitivity sliders are full right and the null zone is full left
I load the aircraft from the menu dialog ( starting screen) in the p3d...
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33313
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Skylane no nosewheel steering
Just to confirm it worked before you updated?
And you restarted your system between installs?
And you are using the P3Dv4 version of the C182 and C172.
thanks,
Lewis
And you restarted your system between installs?
And you are using the P3Dv4 version of the C182 and C172.
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Re: Skylane no nosewheel steering
yes it worked before update to p3d v4.2.
I have made restarts between installs and i use the C182 and C172 on p3dv4 !
I have made restarts between installs and i use the C182 and C172 on p3dv4 !
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33313
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Skylane no nosewheel steering
OK great, can you please check your control input in P3D Settings. It might need changing from Direct input to Raw input.
thanks,
Lewis
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Re: Skylane no nosewheel steering
I have try it, still the same!
Re: Skylane no nosewheel steering
I have tryed the Cherokee 180 !
By the Cherokee the nosewheel turns to the left and right full deflection but the aircraft doesn´t turn to left or right!!! The aircraft still move straight on without turns...!!!
I think the controls can not to be the cause of the problem. If i move the CH pedals the nosewheel turns full defection....
By the Cherokee the nosewheel turns to the left and right full deflection but the aircraft doesn´t turn to left or right!!! The aircraft still move straight on without turns...!!!
I think the controls can not to be the cause of the problem. If i move the CH pedals the nosewheel turns full defection....
Re: Skylane no nosewheel steering
Ok the Cherokee works now ! I have deleted the AppData/ roaming/ P3Dv4 folder....
But the C182 and C172 doesn´t work....
But the C182 and C172 doesn´t work....
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33313
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Skylane no nosewheel steering
Dave, it sounds like your P3D install itself might have an issue or the aircraft install. Please try a reinstall and delete the update folders here;
\Prepar3D v4 Add-ons\A2A\A2A\Cessna172
\Prepar3D v4 Add-ons\A2A\A2A\Cessna182
Reinstall the aircraft and then re-run the update making sure to restart the system and run as admin (right click select run as admin).
thanks,
Lewis - A2A
\Prepar3D v4 Add-ons\A2A\A2A\Cessna172
\Prepar3D v4 Add-ons\A2A\A2A\Cessna182
Reinstall the aircraft and then re-run the update making sure to restart the system and run as admin (right click select run as admin).
thanks,
Lewis - A2A
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Who is online
Users browsing this forum: No registered users and 20 guests