Hello,
That typical noise of the tires hitting the runway on landing is no longer present.... I reinstall the A/C (and the last update) but no change. Strangely, all other engine/cabin/environment noises are ok.
Any ideas ?
TIA.
Tires squealing.
- guillaume78150
- Staff Sergeant
- Posts: 467
- Joined: 08 Oct 2015, 06:07
- Location: North Burgundy
- Contact:
- Nick - A2A
- A2A Captain
- Posts: 13734
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Tires squealing.
Hi Guillaume,
It's probably worth checking your toe brake axis calibration. If the brakes are slightly applied on touchdown, the tire squeal effects are inhibited.
Thanks,
Nick
It's probably worth checking your toe brake axis calibration. If the brakes are slightly applied on touchdown, the tire squeal effects are inhibited.
Thanks,
Nick
- guillaume78150
- Staff Sergeant
- Posts: 467
- Joined: 08 Oct 2015, 06:07
- Location: North Burgundy
- Contact:
Re: Tires squealing.
Hi Nick,
Thanks. But were is that calibration checking ?
Thanks. But were is that calibration checking ?
- Nick - A2A
- A2A Captain
- Posts: 13734
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Tires squealing.
Depends on your hardware and software to be honest. Are you using rudder pedals with separate toe brakes for example?
Thanks,
Nick
P.S. This little A2A utility should allow you to check your actual brake inputs: Brakes Test.exe.
Thanks,
Nick
P.S. This little A2A utility should allow you to check your actual brake inputs: Brakes Test.exe.
- guillaume78150
- Staff Sergeant
- Posts: 467
- Joined: 08 Oct 2015, 06:07
- Location: North Burgundy
- Contact:
Re: Tires squealing.
Thanks, that was it.
I never use it and forgot it was there, CH PRo Pedal calibration tool.
Works fine and tires squeal again.
I never use it and forgot it was there, CH PRo Pedal calibration tool.
Works fine and tires squeal again.
- guillaume78150
- Staff Sergeant
- Posts: 467
- Joined: 08 Oct 2015, 06:07
- Location: North Burgundy
- Contact:
Re: Tires squealing.
Hi Nick,Nick - A2A wrote: ↑25 Apr 2018, 06:56 Depends on your hardware and software to be honest. Are you using rudder pedals with separate toe brakes for example?
Thanks,
Nick
P.S. This little A2A utility should allow you to check your actual brake inputs: Brakes Test.exe.
Is there the same "Brakes Test" utility for P3D ?
Thanks.
G.
Who is online
Users browsing this forum: No registered users and 4 guests