Thanks guys for your replies.
FSUIPC is out of the way.
I already tried it with both FSUIPC calibrations and direkt from P3D. All were not working.
So I try a reinstallation now.
Are there any hidden files of A2A I have to manualy delete?
Thanks, Rico.
Comanche Won't Turn during Taxi
Re: Comanche Won't Turn during Taxi
What I meant was that I had to assign the rudder pedals in FSUIPC, but instead of assigning as a a normal FSUIPC axis ... which is the top box.... you have to assign as a Normal FS Axis.... the second box down.
Then.... you have to delete the calibration of the rudder axes, in the FSUIPC calibration page.
Then.... you have to delete the calibration of the rudder axes, in the FSUIPC calibration page.
i7 7700k (4.5 GHz) / GTX 1080 8GB - Gigabyte Windforce OC 3X / 32GB DDR4 2400 Hz (CL15) / Samsung EVO 970 plus M.2 nvme (1TB) / BeQuiet 650W PSU 50amps 12v rail -- (with P3Dv4, AS + ASCA / REX Texture Direct)
-
- Airman Basic
- Posts: 5
- Joined: 15 Oct 2018, 11:40
Re: Comanche Won't Turn during Taxi
Hello again,
@Gabe777: I know what you mean. This is no fix, too. I already tried it.
@ ALL: Following the deinstallation I noticed an old P3DV3 A2A Folder on an other SDD. Deleted, reinstalled, working. I am so passionated for this aircraft.
Thanks for your help everybody.
Many happy landing.
Greetings,
Rico
@Gabe777: I know what you mean. This is no fix, too. I already tried it.
@ ALL: Following the deinstallation I noticed an old P3DV3 A2A Folder on an other SDD. Deleted, reinstalled, working. I am so passionated for this aircraft.
Thanks for your help everybody.
Many happy landing.
Greetings,
Rico
Re: Comanche Won't Turn during Taxi
Good. Hope you get it all working.
Lots of good folks on here will help you.
Just keep gping until it is sorted and let us know how you get on.
Lots of good folks on here will help you.
Just keep gping until it is sorted and let us know how you get on.
i7 7700k (4.5 GHz) / GTX 1080 8GB - Gigabyte Windforce OC 3X / 32GB DDR4 2400 Hz (CL15) / Samsung EVO 970 plus M.2 nvme (1TB) / BeQuiet 650W PSU 50amps 12v rail -- (with P3Dv4, AS + ASCA / REX Texture Direct)
-
- Airman Basic
- Posts: 5
- Joined: 15 Oct 2018, 11:40
Re: Comanche Won't Turn during Taxi
Just made a testflight.
Everything works fine.
Thank you everybody.
Rico
Everything works fine.
Thank you everybody.
Rico
- Nick - A2A
- A2A Captain
- Posts: 13811
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Comanche Won't Turn during Taxi
Thanks for the update Rico - good to hear you're back in business and apologies for not replying to your last few posts. Have been tied up with other work today.
Cheers,
Nick
Cheers,
Nick
Who is online
Users browsing this forum: No registered users and 24 guests