Issues with track ir + f1 gtn 750

[n421nj]

Did a flight tonight in the v35 with track ir for the first time. I ran the bo with the flight1 gtn 650 and 750. Normally when I use the gtn’s if I try to click on them in the vc it takes a few clicks to click the right area. If I open the 2d panel I can click right away without problems. Well tonight the gtn 750 was not behaving. In Vc or 2d panel it still acted like I was in Vc and took me multiple times to click on a single button and then I got a swirling mouse and the gtn 750 froze. The 650 worked fine with no issues. I ended up switching to only the gtn 650.
Th only thing different was an accusim update and track ir. I will need to investigate further to identify the culprit but since my sim time is over for a few days I was wondering if others had the same issue and could perhaps save me a few moments.

[Nick - A2A]

Hi Andrew,

Sorry for the rather delayed response but did you ever manage to reproduce or isolate this issue? I'm afraid I don't own any TrackIR hardware, so not really able to try and reproduce this one myself.

Thanks,
Nick

[n421nj]

Yes it appears the last accusim update is the culprit. Only effects the gtn750 not the 650. End result until the issue can be addressed and fixed is gtn650s in all my planes

[Nick - A2A]

Andrew,

Is this with a dual GTN installation (i.e. GTN 750 and 650) or single 750 only? There is a current issue with VC click spots in the single 750 as discussed here.

Thanks,
Nick

[n421nj]

Both the 650 and 750 installed as well as the 750 by itself. I’ve tried the 750 in the c172 Cherokee Comanche and bonanza and same thing for each. Only the 650 works

[Nick - A2A]

Thanks Andrew,

If this is an issue affecting the Cherokee and Comanche too, sounds like it's not related to the latest Bonanza update but rather TrackIR. Have you tried in other default aircraft or contacting F1 or TrackIR for support?

Nick