Hey guys, can someone help me. I don't know how to start the civilian mustang, can someone tell me how. If someone could
it will be a big help.
How do i start civillian mustang?
Re: How do i start civillian mustang?
First thing, do you have accusim for the P51? If so, make sure to install the latest core update as well. Next would be to check the shift 4 panel, and make sure you have fuel, oil, coolant filled. The manual in the computers start menu under A2A will explain how to start and fly the aircraft. Best to read this thoroughly. Basically, batt on, fuel on, open throttle 1 inch or so, fuel pump on, prime a few seconds, starter on, count 6 blades, mags on. Turn starter switch off, set throttle for 800 to 1000rpms. Might have to prime a little longer if outside temps are cold.
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33284
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: How do i start civillian mustang?
Additional to the great advice from Robert, this will also help you out;
[youtube]http://www.youtube.com/watch?v=cUOmJzxoaCA[/youtube]
thanks,
Lewis
[youtube]http://www.youtube.com/watch?v=cUOmJzxoaCA[/youtube]
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
-
- Airman
- Posts: 21
- Joined: 04 Mar 2014, 10:03
Re: How do i start civillian mustang?
thanks for help, I tried this, but it still won't start, I am a little bad at this, and I have the 1.2 core update, what else can I do, and thanks for the video, that's unfortunately a different mustang to the civilian one :/
Michael
Michael
- Norforce
- Senior Master Sergeant
- Posts: 1894
- Joined: 09 Apr 2010, 17:14
- Location: Geraldton, Western Australia
Re: How do i start civillian mustang?
It is still a WWII P51 which is still the same plane to start.
The difference is just the Avionics that have been put into a WWII P51
The difference is just the Avionics that have been put into a WWII P51
-
- Airman
- Posts: 21
- Joined: 04 Mar 2014, 10:03
Re: How do i start civillian mustang?
hahaha, sweet, I am confused at starting it hahaha
michael
michael
- bladerunner900
- Senior Master Sergeant
- Posts: 1991
- Joined: 17 Aug 2008, 14:59
- Location: South Wales
Re: How do i start civillian mustang?
You say you have the 1.2 core update, then you should start by installing the 1.6 update immediately.
Core 1.6 update here.
Then read the manual. It's all there.
Core 1.6 update here.
Then read the manual. It's all there.
Re: How do i start civillian mustang?
If all else fails, try pressing Ctrl-e. This should at least get you started so you can fly the thing, and later practice the real start-up sequence as you get more familiar with the plane!
Joe
Joe
Joe
- Bruce Hamilton
- Senior Master Sergeant
- Posts: 2251
- Joined: 20 Sep 2009, 13:28
Re: How do i start civillian mustang?
Better to press shift-3 and click autostart. Not sure AccuSim likes crtl-e.
-
- Airman
- Posts: 21
- Joined: 04 Mar 2014, 10:03
Re: How do i start civillian mustang?
hey guys, sorry, for a VERY late reply, I looked at the Video, and your comments, and I also read the document that is all about the Mustang, and I can start it, taxi it and fly, I love the aircraft and I fly it more than all the others, it an AMAZING, you are always on your toes to make sure nothing happens, thanks for all your help guys.
P.S - sorry for the VERY late reply, been busy flying the Mustang.
Michael
P.S - sorry for the VERY late reply, been busy flying the Mustang.
Michael
Who is online
Users browsing this forum: No registered users and 9 guests