I'd welcome a mailing list type of notification. I think the simplest solution, however, would be a "sticky" and *locked* "Updates" thread that we could all subscribe to (but not post - so only additions/edits by A2A staff would be allowed). Actual *discussion* of the updates could remain in a separate thread similar to this one.
As a Polak/Brit living in NZ, I've always found the US date format utterly confusing. Using 12-Nov-2016 can't be *that* difficult, Shirley? I also get slightly annoyed by people's insistence on using the word "fall" (etc.) which presumes that everyone on the planet lives in the northern hemisphere.
Re: A2A (Accu-Sim) Update (OLD COMMENTS)
Re: Accu-Sim Update 5_9_16 DOWNLOAD
Good idea, Adam. A locked thread which we can subscribe to would work. I tend to forget about subscribing to forum threads, but I have done it on occasion.
Hopefully one of the A2A guys will see this soon and consider the options.
Hope you're enjoying a nice spring down there in the southern hemisphere, whilst we're walking through deep drifts of autumn leaves here The only time I send to see "fall" used regularly is in movie trailers where "coming this fall" is a common phrase, and with that I can see your frustration!
Hopefully one of the A2A guys will see this soon and consider the options.
Hope you're enjoying a nice spring down there in the southern hemisphere, whilst we're walking through deep drifts of autumn leaves here The only time I send to see "fall" used regularly is in movie trailers where "coming this fall" is a common phrase, and with that I can see your frustration!
Re: Accu-Sim Update 5_9_16 DOWNLOAD
All set for a nice globally warmed summer here!!! I just pity the poor guys here at Christmas in full Santa suits in some of the hottest days of the year!Mustang wrote:Hope you're enjoying a nice spring down there in the southern hemisphere, whilst we're walking through deep drifts of autumn leaves here The only time I send to see "fall" used regularly is in movie trailers where "coming this fall" is a common phrase, and with that I can see your frustration!
Re: Accu-Sim Update 5_9_16 DOWNLOAD
Hello Mr. General,
I'm interested in flight simulation since the 90s and I know most of the strengths and weakness especially in practical application of the software.
Yesterday I bought from A2A „Cessna 182 Skylane for FS X“ (per FSpilotshop)
The graphics are excellent and very sharp on my UHD monitor.
I can handle the service well.
Also I updated with Accu-Sim 5_9_16.
Start ok but . . . .
as soon as I turned on the AP I have problems to keep the ALT and the plane crashed.
The propellers were bent.
OK, I tried to repair the damage - I could not.
I restarted the flightsim, clicked C182 on. BEFORE I restarted the motor I turned on the light because it was dark. Suddenly the propeller bent.
I reinstalled the software and the same damage was shown again and i could not
fix the problem although I have not yet started the plane.
These Problems occur only with this aircraft from A2A.
FACT: ÂÂAs soon as I load C182 and switch the light the propellers bent. . . .
I'm very disappointed and extremely frustrated!
Please help!
Thank you!
Best regards,
René (LOWW)
mailto:[email protected]
I'm interested in flight simulation since the 90s and I know most of the strengths and weakness especially in practical application of the software.
Yesterday I bought from A2A „Cessna 182 Skylane for FS X“ (per FSpilotshop)
The graphics are excellent and very sharp on my UHD monitor.
I can handle the service well.
Also I updated with Accu-Sim 5_9_16.
Start ok but . . . .
as soon as I turned on the AP I have problems to keep the ALT and the plane crashed.
The propellers were bent.
OK, I tried to repair the damage - I could not.
I restarted the flightsim, clicked C182 on. BEFORE I restarted the motor I turned on the light because it was dark. Suddenly the propeller bent.
I reinstalled the software and the same damage was shown again and i could not
fix the problem although I have not yet started the plane.
These Problems occur only with this aircraft from A2A.
FACT: ÂÂAs soon as I load C182 and switch the light the propellers bent. . . .
I'm very disappointed and extremely frustrated!
Please help!
Thank you!
Best regards,
René (LOWW)
mailto:[email protected]
Re: Accu-Sim Update 5_9_16 DOWNLOAD
You need to post this away from this thread to get a reply.
But if it helps. Have you been into the hanger to repair trhe damage?
But if it helps. Have you been into the hanger to repair trhe damage?
-
- Senior Master Sergeant
- Posts: 1657
- Joined: 27 Jun 2009, 03:39
- Location: Southern Germany
- Contact:
Re: A2A (Accu-Sim) Update (OLD COMMENTS)
Hi René
please make sure that you run both the installation and the Update as well as your simulator an admin. Also please make sure your simconnect runs properly, you may find a simconnect instal with a simple search.
and, last but not least, you might delete your 182 .dat files in your documents in case of accidentally corrupted files.
If that won't help, just let us know, you will get help.
Greets,
Marc
Edit: I've just seen that you found the way to the 182 tech support forum =)
please make sure that you run both the installation and the Update as well as your simulator an admin. Also please make sure your simconnect runs properly, you may find a simconnect instal with a simple search.
and, last but not least, you might delete your 182 .dat files in your documents in case of accidentally corrupted files.
If that won't help, just let us know, you will get help.
Greets,
Marc
Edit: I've just seen that you found the way to the 182 tech support forum =)
- Nick - A2A
- A2A Captain
- Posts: 13797
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Accu-Sim Update 5_9_16 DOWNLOAD
Looks like one them did!Mustang wrote:Good idea, Adam. A locked thread which we can subscribe to would work. I tend to forget about subscribing to forum threads, but I have done it on occasion.
Hopefully one of the A2A guys will see this soon and consider the options.
Nick
Re: A2A (Accu-Sim) Update (OLD COMMENTS)
Why can't I see the download link?? I'm trying to update a Cessna 172
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33313
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: A2A (Accu-Sim) Update (OLD COMMENTS)
Hello,Sufah wrote:Why can't I see the download link?? I'm trying to update a Cessna 172
its pinned to the top of all forums
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Re: A2A (Accu-Sim) Update (OLD COMMENTS)
I just re-installed the C-182 and need to run the updater and I cannot find it either. What is the most recent version? Perhaps a link would help.
JDS
JDS
-
- Technical Sergeant
- Posts: 899
- Joined: 30 Nov 2014, 19:07
- Location: US
- Contact:
Re: Accu-Sim Update 5_9_16 DOWNLOAD
Looks like they did, that's great. Now we just need the date format changing for clearer definition of days and months!Nick M wrote:Looks like one them did!Mustang wrote:Good idea, Adam. A locked thread which we can subscribe to would work. I tend to forget about subscribing to forum threads, but I have done it on occasion.
Hopefully one of the A2A guys will see this soon and consider the options.
Nick
Question - if that announcement thread is a single post and Scott only edits it, will subscribers still get a notification? Might be a spanner in the works...
Martyn
Re: A2A (Accu-Sim) Update (OLD COMMENTS)
By chance I see there was an Accu-Sim update released on the 17th Jan, but being subscribed to the sticky thread did not work to generate a notification.
Perhaps in future, Scott could add a brief post in reply to the original, in addition to editing the main post, so any subscribers get an e-mail. I'm sure it would be appreciated by all who would like a way to receive notifications of updates since there is no other means at the moment.
Thanks,
Martyn
Perhaps in future, Scott could add a brief post in reply to the original, in addition to editing the main post, so any subscribers get an e-mail. I'm sure it would be appreciated by all who would like a way to receive notifications of updates since there is no other means at the moment.
Thanks,
Martyn
Re: A2A (Accu-Sim) Update (OLD COMMENTS)
Well - it's been years since I've been here.
I like combat, so DCS, IL-2 & WarThunder have taken my time. But (following all sorts of nasties PC-wise - inc a CLEAN install of Win10 in March this year) I'm now trying to get FSX running again. I have got back my A2A Spits & they work fine - but my A2A Cherokee isn't playing the game. I can get into it & throw switches, by they do nothing (except the radio power switch does flick up the 'Nav' indicator on one of the compasses).
Although my Spits respond fully, the Cherokee doesn't respond at all to my stick & throttle (Warthog) or rudder pedals. Throwing the fuel pump switch (as an example) moves the switch, but nothing else happens - no sound of pump running - it's as tho' the battery was all but totally flat. SHIFT+7 opens the maintenance hangar, but with the message that maintenance can only be accessed on the ground with engine stopped (which is what I actually have) - or - 'Click here to bypass' - which does nothing... Help...?
Oh, and yes - Master power is ON.....
Additionally, the strobe lights are working, but after a good long time with the window closed, the cockpit windows are NOT misting up....
Have to confess I've forgotten EVERYTHING.....
I like combat, so DCS, IL-2 & WarThunder have taken my time. But (following all sorts of nasties PC-wise - inc a CLEAN install of Win10 in March this year) I'm now trying to get FSX running again. I have got back my A2A Spits & they work fine - but my A2A Cherokee isn't playing the game. I can get into it & throw switches, by they do nothing (except the radio power switch does flick up the 'Nav' indicator on one of the compasses).
Although my Spits respond fully, the Cherokee doesn't respond at all to my stick & throttle (Warthog) or rudder pedals. Throwing the fuel pump switch (as an example) moves the switch, but nothing else happens - no sound of pump running - it's as tho' the battery was all but totally flat. SHIFT+7 opens the maintenance hangar, but with the message that maintenance can only be accessed on the ground with engine stopped (which is what I actually have) - or - 'Click here to bypass' - which does nothing... Help...?
Oh, and yes - Master power is ON.....
Additionally, the strobe lights are working, but after a good long time with the window closed, the cockpit windows are NOT misting up....
Have to confess I've forgotten EVERYTHING.....
A2A Spitfire, A2A Cherokee
Thrustmaster Warthog HOTAS
CH Pro Pedals
TrackIR
Thrustmaster Warthog HOTAS
CH Pro Pedals
TrackIR
Re: A2A (Accu-Sim) Update (OLD COMMENTS)
I cannot navigate to thewalkaround tab using shift+8
Who is online
Users browsing this forum: No registered users and 51 guests