P-51 and P-51 Civilian abruptly turn to the left.

[Satena1971]

A2A,
Thank you in advance for your support. I have the same problem that some users had express here in the forum.
Since the last two updates of Accu-sim the P-51 and P-51 Civilian version are acting up. Not need to explain the problem again as you know it’s the same, I mean turning to the left abruptly.
I rather let you know guys what I have done:
1. Remove Aircraft totally
2. Reinstalled
3. Removed .dat files (as suggested on the forum)
4. Run the updater (last one in your website)
5. Ruin FSX STEAM
a. Load aircraft dark and cool
b. 50% fuel, no central fuel tank
c. Set aircraft for takeoff (As per manual with 6 degrees of rudder)
d. Lost control after 25” to 30” of manifold
e. Verified flight control settings, null zones and everything else.
f. Try differing takeoff settings ( as suggested by users and experts)
g. Still the same results (20 attempts at least)

My final question is, is there anything wrong with Accu-sim, the aircraft model, the last two updates, or anything else?

I hope to hear from you guys soon

[Satena1971]

Dear A2A,

It seems I found out the solution to this problem, and I like to share it for those who are having the same problem:

1. Remove P-51 and P-51 Civilian
2. Reinstall one at the time
3.Reinstall Accu-sim
4. Didn't install any update or anything else
5. Run FSX Steam and load both aircraft (two takes off and two landing each, no problems)
6.Finally Run the last update and that one only (05-09-16)

Now both aircraft flying again.....

Thanks.

Oscar

[Piper_EEWL]

Hi Oscar,

Just on question. Did you delete the update client.wyc file before running the updater again? This is not uninstalled when uninstalling the aircraft. If you don't delete that file before running the updater again it will result in the update not installing.

[Lewis - A2A]

Yes without removing the update folder for the relevant aircraft no update will be applied.

thanks,
Lewis

[WB_FlashOver]

Yes without removing the update folder for the relevant aircraft no update will be applied.

thanks,
Lewis

Wait, what? This is new to me. I watch these forums a couple times a week but may have missed something. Is this something that needs done prior to each update for each aircraft or only when an update is not applied properly?
Thanks
Roger

[Piper_EEWL]

Wait, what? This is new to me. I watch these forums a couple times a week but may have missed something. Is this something that needs done prior to each update for each aircraft or only when an update is not applied properly?
Thanks
Roger

No that only needs to be done if you had previously installed that aircraft than uninstalled or reinstalled. In order for the update to take you need to delet the client.wyc file in your FS root folder --> A2A --> "Accusim plane" --> update_fsx
If you're not sure if the update took correctly you can do this. Not necessary between normal updates.

Happy flying