The A2A Simulations Community

Hi guys, it seems the P-40 input configurator isn't working here.
UAC off, admin rights, etc...all done, no joy. My FSX instalation is on C:\.
Win7 64 bits, Saitek Quadrant and MS Sidewinder.
Tried a reinstall, no success either.

Apart from that, great aircraft! Love it! Thank you.

Can you explain what you mean when you say it isn't working? Does it come up OK? If so, what exactly isn't working?

Scott.

_________________
A2A Simulations Inc.

It comes up, I can assign buttons and levers, save them but in FSX none of the assignment works.

Can you try running it straight from your A2A / P40 folder rather than the shortcut in the start menu?

_________________
A2A Simulations Inc.

Scott, I found the problem.
I had my controllers turned off in FSX, because I'm using direct FSUIPC commands.
Enabled and working now! Thanks for your support.

And I have 1 little problem.
First of all - thank you A2A for the next amazing aircraft! I realy feel the soul of this plane, almost smell its metal, oil and exhaust
It is very nice You put headphones shortcut into input config. Unfortunately, it doesn't work properly, at least with my FSX. All works fine via 2d panell, but pressing the shortcut gives the result:
on the 2d panell there is "HEADPHONES" lighted, sound doesn't change, headphones on 2d becomes turned off after 2-3 sec. Same with Spitfire. I have tried with various shortcuts - keyboard and joy

_________________
[url=http://a2asimulations.com]

Anyone have the same problem with headphones or my FSX installation needs to be repaired?

_________________
[url=http://a2asimulations.com]

We'll check this.

Scott.

_________________
A2A Simulations Inc.

Great, thank you.

_________________
[url=http://a2asimulations.com]

I'm getting an Unhandled exception error when I try to run it in the start menu and from the folder also.


just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
Error in the application.
-2147024866 (DIERR_INPUTLOST)
at Microsoft.DirectX.DirectInput.Device.get_CurrentJoystickState()
at _P40Configurator.JoystickData..ctor(Device joystick)
at _P40Configurator.MainWindow.enumerateJoysticks()
at _P40Configurator.MainWindow.timer1_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5448 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
P40 Input Configurator
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0
CodeBase: file:///F:/MICROS~1/A2A/P40/Tools/P40%20Input%20Configurator.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5446 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5447 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Microsoft.DirectX.DirectInput
Assembly Version: 1.0.2902.0
Win32 Version: 5.04.00.2904
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.DirectX.DirectInput/1.0.2902.0__31bf3856ad364e35/Microsoft.DirectX.DirectInput.dll
----------------------------------------
Microsoft.DirectX
Assembly Version: 1.0.2902.0
Win32 Version: 5.04.00.2904
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.DirectX/1.0.2902.0__31bf3856ad364e35/Microsoft.DirectX.dll
----------------------------------------
Microsoft.VisualC
Assembly Version: 8.0.0.0
Win32 Version: 8.00.50727.4927
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualC/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualC.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

_________________
P5E3 Premium/WiFi-AP @n Intel X48 chipset
Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6MB L2 Cache LGA 775 95W Quad-Core Processor
ASUS EAH3870X2 TOP/G/3DHTI/1G vid card
G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit

Villicus if running win7 make sure you run as admin (right click run as administrator) make sure your .net from windows up date is up to date.

_________________
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
My twitter for my own twitter and random A2A insights

Thanks Lewis, I think it's time for a new SSD. The one my OS is on is packed to the gills which may be my problem. I'll get a 160GB one this time which should last me a bit longer.

_________________
P5E3 Premium/WiFi-AP @n Intel X48 chipset
Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6MB L2 Cache LGA 775 95W Quad-Core Processor
ASUS EAH3870X2 TOP/G/3DHTI/1G vid card
G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit

I also can't get it to work properly. I have a Thrustmaster HOTAS X and I'm trying to assign the hydraulic pump switch to a button on the stick. When I press the button in the input configurator it intercepts the button press properly (it says: "joystick:0:button:2), but when I press that button in the game the hydraulic pump isn't activated. I already tried running the configurator directly from its folder and with the Run as Administrator option via context menu, but to no avail. Also, I don't use FSUIPC to configure the controllers.

_________________
Happy Landings
- Patrick

Problems here also. Running from the start menu, as admin and not, configurator comes up, but other than highlighting the various choices, nothing happens. Highlighting an option (hydraulic switch current concern), then pressing a button on joystick, nothing happens.

WinVista 64 Home. Saitek X-52. FSX in default location.

??

Try double clicking on an option to open the cell, then press a button.