The A2A Simulations Community

I enjoy making IFR ILS approaches. Preferably real weather with low vis rainy weather OTW.
I am having a problem making IFR ILS approaches because the ILS needles will not line me up on the runway that I have dialed in. I have attempted several approaches at familiar air fields and the needles err every time. If I flew the needles I would become a lawn dart. Any suggestions?

Does the ILS actually line up with the runway in FS? I know of a few that are way off.

_________________

Yes in the beginning of the approach the needles appear to line up in the general direction of the runway. As the approach proceeds and especially when the altitude bar starts dropping the course bar drifts to the right and the altitude bar continues to drop even tho the Vasi is showing full red (below glide path). At decision height 300' the course needle is off to the right with the AC lined up perfectly on the runway. The altitude bar indicates that the AC should be much lower even tho the Vasi indicates that I am on glide path. If I fly the needles excluseivly I would crash.
Hope this clearly explaines my problem.

Can you get a screenshot please? Also - which airport/runway, and do you have any add-on scenery installed there?

Best regards,
Robin.

_________________
A2A/AccuSim. 'nuff said!

No add on scenery. Try KCHS Rwy 15 ILS 109.7 and /or Rwy 33 ILS 108.8. If you are not having problems with the accuracy of the ILS needles in your Strat then it might be necessary for me to uninstall and reinstall my Strat to resolve the problem.

Hi,

I'll try it shortly!

Do you have CotS?

Best regards,
Robin.

_________________
A2A/AccuSim. 'nuff said!

I tried the rwy 33 ILS approach in the Stratocruiser and saw no anomalies. Both the loc and gs took me right in.

Have you tried doing these approaches using a different airplane, and if so, what happens?

_________________
1)i7 980x 4.35 ghz, gtx 470s SLI, Matrox th2go, Creative x-fi
2)i7 2600k, Gigabyte z68x, gtx 285s sli

I have the same problem with the ILS not working correctly. I have tried the approach using the default C-172 (no problem), PMDG JS41 (no problem) using both default scenery and FSDream Team scenery. The LOC and G/S show the B377 to be high and to the right of course.

Unless the ILS problem can be fixed, the B377 is a VFR only aircraft, or restricted to non-precision approaches using the RMI.

BS

After numerous attempts to fix this problem and a request for support from A2A that went unanswered, I finally came up with a solution for this problem. The solution is to DELETE the airplane from my Harddrive. What a shame, it had so much potential.

BS

Sorry you feel that way BS,I would not give up so quick,I myself somtimes have situations in FSX that an ILS glidslope and VOR's does not work in a situation,funny thing though the next time I try it, it works. Go figure that one. I don't think this is an A2A problem with the Stratocruiser at all, it's Microsoft FSX. I seem to remember reading something about problems with this in another forum some time back in the past, I can't remember where,but the issue was hinted at SimConnect. I myself don't know. What kind of system do you run FSX on?? that can have alot to do with it.

Best Regards
Mark S.

_________________
Boeing B-17G Flying Fortress-Accusimed/Boeing 377 Stratocruiser-COTS/ Piper Cub-Accusimed
Windows Vista 32 Bit/Quad Core 2.4GHz/4GB Ram/Nvidia 8800GTX

I run FSX on a dedicated Vista 32 machine using Simconnect for ASE. The ILS works on the Captain Sim C130, PMDG B737/B747/MD11, JS41, CLS DC10/B747, HJG B707/B727, and the default FSX aircraft. I even created a small 2d panel for B377 with just an ILS gauge which showed the aircraft in the correct positon on the LOC/GS, but the B377 ILS always shows the aircraft to be high and to the right of the correct path.

Before you beat on me about not understanding ILS and big radials I have a DC-3 type rating and having been a military/commercial pilot for 45 years.

BS

I'm not an official A2A member, but I can assure you it's being looked at. As we are using standard coding for the ILS, it is odd that it is not working properly, and beyond this thread, there are no other reports of this happening that the users themselves haven't fixed on their end.

_________________

I, for one, have never seen a problem with the ILS operation and even tried an alternate 2D ILS as per the method BS described with these results:





I dual boot Xp SP3 and W7 64 bit with FSX SP2 on the Xp platform and FSX Acc on the other. I see no problem in either system.

_________________
Regards
Bruce

It's is now too late. Since A2A has not replied to my concerns/problems with the B377, I have now deleted the B377 from my hard drive. The sad thing is there were other aircraft they build that appeared very interesting that I've decided not to purchase because of the unresloved problems I've had with the B377.

BS

I'm sorry the 377 doesn't meet your standards, nevertheless it's fun to fly and always a challenge (at least for me) to land this bird.
I honestly hope you will give it another try once your anger has faded. You said you were a pilot for the military. I can't believe you're giving up that easily, just because some thing doesn't work as expected! No offence.
Unlike you, I have zero real life flying experience and therefore don't know jack ?()^ about ILS approaches or flying in general. So I can't really comment or help you with this particular issue.

_________________
Check out my FSX videos here:
http://www.youtube.com/user/racefreak1976