Ok, thx again Nick.
Strange enough I never needed the GNS set-up before. Anyhow: activating 'Connect GPS to HSI' in the set-up did the trick.
Time to re-enjoy the Cherokee, in my humble opinion still A2A's very best!
Best regards and stay safe, Willem
Search found 16 matches
- 11 Apr 2021, 08:11
- Forum: Piper Cherokee 180 Tech Support
- Topic: A/P is ignoring the RXP GNS 530
- Replies: 5
- Views: 5378
- 11 Apr 2021, 07:01
- Forum: Piper Cherokee 180 Tech Support
- Topic: A/P is ignoring the RXP GNS 530
- Replies: 5
- Views: 5378
Re: A/P is ignoring the RXP GNS 530
Hi Nick, appreciate yr quick reply! I've never played with the GNS settings earlier. Maybe silly: where to find the RXP GNS settings like 'Linkvor = true' etc.. And yep, I'm aware of the S-TEC vs. KAP 140 routines: totally different. What puzzles me is that the S-TEC/GNS30 in the Comanche is ok. Thx...
- 11 Apr 2021, 06:11
- Forum: Piper Cherokee 180 Tech Support
- Topic: A/P is ignoring the RXP GNS 530
- Replies: 5
- Views: 5378
A/P is ignoring the RXP GNS 530
Folks, hi!
Strange issue: the RXP GNS 530, combined with the a/p, is working flawless (although slow, which is normal) in the Comanche. However the a/p is complete ignoring the GNS on a similar track in the Cherokee.
Any clue what can be wrong?
Thx and regards, Willem
Strange issue: the RXP GNS 530, combined with the a/p, is working flawless (although slow, which is normal) in the Comanche. However the a/p is complete ignoring the GNS on a similar track in the Cherokee.
Any clue what can be wrong?
Thx and regards, Willem
- 12 Dec 2018, 09:31
- Forum: Pilot's Lounge
- Topic: Install issue (DirectX)
- Replies: 3
- Views: 431
Re: Install issue (DirectX)
Thx Nick! Yep, I'm using the new installers, great stuff! And yesterday I had the impression just like you, that the anti-virus was blocking the DirectX pop-up. Consequently I retried while the anti-virus was de-activated. No success unfortunately. Based upon yr remark this time I de-activated the w...
- 12 Dec 2018, 06:30
- Forum: Pilot's Lounge
- Topic: Install issue (DirectX)
- Replies: 3
- Views: 431
Install issue (DirectX)
Folks, hi! After installing a new 1TB SSD, I completely re-installed P3D v4.4 incl. all add-on's. For your info: I'm running W10, DirectX 12 installed. All my A2A add-on's are coming to a full stop when installing when the A2A install program is finished and the system starts looking to Microsoft's ...
- 21 Apr 2015, 15:32
- Forum: Piper Cherokee 180 Tech Support
- Topic: Cherokee crashing after loading
- Replies: 3
- Views: 1327
Re: Cherokee crashing after loading
In the rebound: I re-installed the GTN750 (and did not change the default directory this time) and the GTN is working now.
Cherokee is still crashing when loading 'from scratch' but when loaded 2nd in line it's better then ever!
The slight loading inconvenience is no problem.
Brgds., Willem
Cherokee is still crashing when loading 'from scratch' but when loaded 2nd in line it's better then ever!
The slight loading inconvenience is no problem.
Brgds., Willem
- 21 Apr 2015, 14:57
- Forum: Piper Cherokee 180 Tech Support
- Topic: Cherokee crashing after loading
- Replies: 3
- Views: 1327
Re: Cherokee crashing after loading
Thx quick reply Lewis! Still a bit strange that all of a sudden (after installing the GTN) things changed just for the Cherokee. The 172 and 182 did not. But anyhow, it's not a big issue, just uncomfortable. It was all about a fresh install into FSX SE of the latest release of the GTN. Which ended n...
- 20 Apr 2015, 13:16
- Forum: Piper Cherokee 180 Tech Support
- Topic: Cherokee crashing after loading
- Replies: 3
- Views: 1327
Cherokee crashing after loading
Folks, hi, Strange problem over here: the Cherokee was running fine (when loading immediately from FSX's splash screen) in SE till installing the GTN750 in FSX. Right now the Cherokee is showing up but just responding to + and - key. Any other input is inoperative. Finally FSX will crash showing 'at...
- 20 Jun 2014, 14:45
- Forum: A2A Simulations 3D LIGHTS REDUX
- Topic: Completey uninstall
- Replies: 5
- Views: 3432
Re: Completey uninstall
Lewis, hi again! Bingo! Although the REDUX uninstall is not A2A's 'all time best effort' to put it mildly (it showed a strange 'folder not found' or so error), I found the cause of all misery: some light settings in REX 4. Strange enough REX is interfering with landing lights on Espen's DC-9 and the...
- 04 Jun 2014, 14:32
- Forum: A2A Simulations 3D LIGHTS REDUX
- Topic: Completey uninstall
- Replies: 5
- Views: 3432
Re: Completey uninstall
Hi Lewis! Did you survived the Cherokee release? A great add-on, I love it! Here we go: 3D is causing some strange reflection above my normal landing lights. I prefer to completely un-install and get back to the default lights. I started using 3D with Espen's DC-9 and the Twotter 300. Fortunately di...
- 24 May 2014, 15:53
- Forum: A2A Simulations 3D LIGHTS REDUX
- Topic: Completey uninstall
- Replies: 5
- Views: 3432
Completey uninstall
Lewis, hi, Question: some strange phenomena (MS default a/c, Espen's DC-9 and the Twotter X) after installing 3D. I'd prefer to complete uninstall the 3D. Seems tough via the main installer. Since I never use MS default a/c's I tried re-installing my add-on's. Unfortunately this doesn't cure the pro...
- 18 Apr 2014, 12:52
- Forum: A2A Simulations 3D LIGHTS REDUX
- Topic: Coolsky DC-9
- Replies: 0
- Views: 1966
Coolsky DC-9
Hi,
Has anyone ever done 3D Redux on Coolsky's DC-9 ... ?
Best! Willem
Has anyone ever done 3D Redux on Coolsky's DC-9 ... ?
Best! Willem
- 11 Mar 2014, 17:34
- Forum: Accu-Feel Technical Support
- Topic: Twin Otter X
- Replies: 4
- Views: 2128
Re: Twin Otter X
Ok Lewis, thx and clear.
Best! Willem
Best! Willem
- 11 Mar 2014, 15:35
- Forum: Accu-Feel Technical Support
- Topic: Twin Otter X
- Replies: 4
- Views: 2128
Re: Twin Otter X
Hi Lewis, thx quick reply!
I re-installed the Otter and Accu-Feel was perfectly fine UNTIL I added my RXP530.
Again FSX crashing upon loading the RXP530 equiped a/c in the main menu.
Is there an explanation or a solution to it ... ?
Thx., Willem
I re-installed the Otter and Accu-Feel was perfectly fine UNTIL I added my RXP530.
Again FSX crashing upon loading the RXP530 equiped a/c in the main menu.
Is there an explanation or a solution to it ... ?
Thx., Willem
- 11 Mar 2014, 08:02
- Forum: Accu-Feel Technical Support
- Topic: Twin Otter X
- Replies: 4
- Views: 2128
Twin Otter X
Folks, hi, I installed Accu-Feel 2 a couple of days ago. Very nice add-on! However I'm experiencing FSX crashes since yesterday when selecting Aerosoft's Twin Otter X (the 300 version) in the aircraft menu during loading of the Otter. It all started with the Otter 300 apparently not talking anymore ...