PA28 updates
PA28 updates
I purchased A2A PA28 Cherokee in 2014. Are there any updates and how do I download them?
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: PA28 updates
Hello and welcome to the A2A forums.
Please see the info in this pinned topic which describes how to transfer purchases from our old store to the new one.
If addition, if your copy of the Cherokee is for FSX or P3Dv3 or earlier, the latest update can be downloaded from here.
Thanks,
Nick
Please see the info in this pinned topic which describes how to transfer purchases from our old store to the new one.
If addition, if your copy of the Cherokee is for FSX or P3Dv3 or earlier, the latest update can be downloaded from here.
Thanks,
Nick
A2A Simulations Inc.
Re: PA28 updates
Thanks Nick-A2A.
I have updated the S/w but am having major problems. I ran the PA28 happily for years on Windows 7...but... when I updated to Windows 10 trouble happened. I have also updated the software for my Proflight yoke. This sorted out a problem with the FSX stock Cessna but made no difference to my Cherokee. In FSX opening screen it showed as the cabin section only with the pilot upside down behind it. On trying to fly there was no internal view at all and only the same outside view as the opening screen. Any thoughts would be much appreciated.
Romac.
I have updated the S/w but am having major problems. I ran the PA28 happily for years on Windows 7...but... when I updated to Windows 10 trouble happened. I have also updated the software for my Proflight yoke. This sorted out a problem with the FSX stock Cessna but made no difference to my Cherokee. In FSX opening screen it showed as the cabin section only with the pilot upside down behind it. On trying to fly there was no internal view at all and only the same outside view as the opening screen. Any thoughts would be much appreciated.
Romac.
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: PA28 updates
Hi Romac - thanks for the info.
I'm guessing you're using the original disk edition of FSX rather than the Steam version or a copy with the Acceleration pack upgrade? In the case, you'll need to download and install both the free service packs from Microsoft. Download links are below:
SP1: https://www.fileplanet.com/archive/p-75 ... te-English
SP2: https://www.microsoft.com/en-gb/downloa ... px?id=8986
Thanks,
Nick
I'm guessing you're using the original disk edition of FSX rather than the Steam version or a copy with the Acceleration pack upgrade? In the case, you'll need to download and install both the free service packs from Microsoft. Download links are below:
SP1: https://www.fileplanet.com/archive/p-75 ... te-English
SP2: https://www.microsoft.com/en-gb/downloa ... px?id=8986
Thanks,
Nick
A2A Simulations Inc.
Re: PA28 updates
I am using the FSX Gold edition which includes an Acceleration disc. I had not installed the Acceleration package. Following your reply I did this and was presented with a black screen.
I did repairs on both FSX and Acceleration with no improvement. I then uninstalled Acceleration and downloaded and installed the two SPs. I now had no start up fsx.exe. I then unzipped fsx.zip and ran the exe, but errors were reported and nothing works. Oh dear, it's lucky that Covid is keeping me housebound, so I will have a chance to uninstall everything and start from scratch! Fingers crossed.
Romac
I did repairs on both FSX and Acceleration with no improvement. I then uninstalled Acceleration and downloaded and installed the two SPs. I now had no start up fsx.exe. I then unzipped fsx.zip and ran the exe, but errors were reported and nothing works. Oh dear, it's lucky that Covid is keeping me housebound, so I will have a chance to uninstall everything and start from scratch! Fingers crossed.
Romac
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: PA28 updates
Okay, thanks for the update Romac.
If you have problems with the FSX reinstall, I recommend you delete all the files generated by the software. So manually remove these directories:
C:\Users\[UserName]\AppData\Roaming\Microsoft\FSX
C:\Users\[UserName]\AppData\Local\Microsoft\FSX
C:\ProgramData\Microsoft\FSX
Thanks,
Nick
If you have problems with the FSX reinstall, I recommend you delete all the files generated by the software. So manually remove these directories:
C:\Users\[UserName]\AppData\Roaming\Microsoft\FSX
C:\Users\[UserName]\AppData\Local\Microsoft\FSX
C:\ProgramData\Microsoft\FSX
Thanks,
Nick
A2A Simulations Inc.
Re: PA28 updates
Thanks again, Nick
I deleted nominated files and then, on running Disc 1 selected "Delete installation". Obviously a mistake as, when trying to reinstall after this, InstallShield gave me "1628: Failed to complete installation". I don't know why as these are my original genuine discs. I tried three times with the same result.
Cheers, Romac
I deleted nominated files and then, on running Disc 1 selected "Delete installation". Obviously a mistake as, when trying to reinstall after this, InstallShield gave me "1628: Failed to complete installation". I don't know why as these are my original genuine discs. I tried three times with the same result.
Cheers, Romac
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: PA28 updates
Hi Romac,
There's a Microsoft Knowledgebase article on this issue here: https://support.microsoft.com/en-gb/hel ... r-messages.
A quick Google of the message also throws up various forum topics relating to the issue in FSX so it may be worth trawling through some of these if the steps above don't help. Something else you may wish to consider is purchasing the Steam version of FSX instead.
Thanks,
Nick
There's a Microsoft Knowledgebase article on this issue here: https://support.microsoft.com/en-gb/hel ... r-messages.
A quick Google of the message also throws up various forum topics relating to the issue in FSX so it may be worth trawling through some of these if the steps above don't help. Something else you may wish to consider is purchasing the Steam version of FSX instead.
Thanks,
Nick
A2A Simulations Inc.
Re: PA28 updates
Hi Nick
I ran this and all my troubles were ended - except - I can't find my A2A Cherokee! All the associated files, manuals etc were there but the plane no longer appears. Where do I find it, or am I an idiot? ( I'm 88 so its quite likely!)
Cheers, Roger
I ran this and all my troubles were ended - except - I can't find my A2A Cherokee! All the associated files, manuals etc were there but the plane no longer appears. Where do I find it, or am I an idiot? ( I'm 88 so its quite likely!)
Cheers, Roger
Re: PA28 updates
Re above, the first line is missing. I downloaded ADVANCED SYSTEM REPAIR PRO.
romac
romac
Re: PA28 updates
Hi Nick,
Found it. Just done a reinstall. Looks OK. I just have to reset the yoke etc as they are doing weird things. I think I can cope now. Many thanks for all your help.
Cheers, romac.
Found it. Just done a reinstall. Looks OK. I just have to reset the yoke etc as they are doing weird things. I think I can cope now. Many thanks for all your help.
Cheers, romac.
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: PA28 updates
Hi Romac,
Good to hear you're back in business and thanks for posting back with the update. Please drop us a line if you need any more help.
All the best,
Nick
Good to hear you're back in business and thanks for posting back with the update. Please drop us a line if you need any more help.
All the best,
Nick
A2A Simulations Inc.
Re: PA28 updates
I had to reinstall FSX and now it will not let me load my a2a planes. It lets me but they are not complete. Like half a plane. How do I update my planes. It's been awhile since I had to.
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: PA28 updates
Sounds like you may be using the original disk edition of FSX rather than the Steam version or a copy with the Acceleration pack upgrade? In the case, you'll need to download and install both the free service packs from Microsoft. Download links are below:
SP1: https://www.fileplanet.com/archive/p-75 ... te-English
SP2: https://www.microsoft.com/en-gb/downloa ... px?id=8986
Also, please run the Accu-Sim update which is available here.
Thanks,
Nick
A2A Simulations Inc.
Who is online
Users browsing this forum: No registered users and 27 guests