RXP GTN Support
RXP GTN Support
Please create a panel config for the RXP GTN version. It's better than flight1's anyway. Thanks.
- Nick - A2A
- A2A Captain
- Posts: 13777
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: RXP GTN Support
Hello Gary,
Although the Aircraft Configurator for the Comanche doesn't include the RXP 750 it should be possible to get it to work.
First of all, use the A2A Aircraft Configurator to select the Flight1 GTN 750 option. Then, use the RealityXP "setup aircraft" tool to detect and replace the F1 gauge entries with RXP ones. This option is available from the P3D top menu, and should look something like this. Note that you need to select the "no bezel" option for the VC as shown.
A second, optional, step is required to enable the bezel buttons and rotary control. For more information on the end-user workaround which was developed, please refer to this post by 'BillS511' on RXP's support forum. RXP's forum on Avsim is a very useful source of info, and you can also check out the info in this post by Bill too.
Thanks,
Nick
Although the Aircraft Configurator for the Comanche doesn't include the RXP 750 it should be possible to get it to work.
First of all, use the A2A Aircraft Configurator to select the Flight1 GTN 750 option. Then, use the RealityXP "setup aircraft" tool to detect and replace the F1 gauge entries with RXP ones. This option is available from the P3D top menu, and should look something like this. Note that you need to select the "no bezel" option for the VC as shown.
A second, optional, step is required to enable the bezel buttons and rotary control. For more information on the end-user workaround which was developed, please refer to this post by 'BillS511' on RXP's support forum. RXP's forum on Avsim is a very useful source of info, and you can also check out the info in this post by Bill too.
Thanks,
Nick
A2A Simulations Inc.
Re: RXP GTN Support
I will try it with no bezel. When I first tried the Flight1 bezel was a lot bigger. So I will try it same size, no bezel. If that doesnt get it maybe I could manually size it right in panel.cfg.
Thanks.
Thanks.
Who is online
Users browsing this forum: No registered users and 17 guests