Landing Gear

Post any technical issues here. This forum gets priority from our staff.
new reply
davenicoll
Airman First Class
Posts: 59
Joined: 27 Feb 2009, 17:24

Landing Gear

Post by davenicoll »

Hi Guys,

I use a Go Flight LGTII module.

When I raise/lower the gear in the Commanche it only goes the one position.

The Commanche has a 2 position switch..Is there a workaround to get the switch to move 2 positions to lower the gear?

Dave

User avatar
Nick - A2A
A2A Captain
Posts: 13734
Joined: 06 Jun 2014, 13:06
Location: UK

Re: Landing Gear

Post by Nick - A2A »

Hi Dave,

There are "gear up" and "gear down" shortcuts in the Comanche Input Configurator which should do the trick.

Cheers,
Nick
A2A Simulations Inc.

davenicoll
Airman First Class
Posts: 59
Joined: 27 Feb 2009, 17:24

Re: Landing Gear

Post by davenicoll »

Have tried numerous times with no success..

In the aircraft configurator it has shortcuts for the keyboard but NOT a joystick axis...

at a loss now..

Dave

User avatar
Nick - A2A
A2A Captain
Posts: 13734
Joined: 06 Jun 2014, 13:06
Location: UK

Re: Landing Gear

Post by Nick - A2A »

Hi Dave,

Not sure it's a good idea to try and use a hardware axis for landing gear although I guess it'd be possible using software like FSUIPC.

It looks like the gear selector on the GF-LGT II panel you mention is a two position switch though. Does the input configurator recognise the switch in both its positions? (The bottom section is not just for keyboard commands; it also works with hardware buttons albeit with some limitations based on the SDKs for FSX/P3D.)

Thanks,
Nick
A2A Simulations Inc.

new reply

Return to “Piper Comanche 250 Tech Support”

Who is online

Users browsing this forum: No registered users and 9 guests