So I did a couple circuits in the 'Bo and noticed that once on final and in landing configuration even full nose up trim does not give you a stable, force-free, approach. I still find myself applying back pressure to maintain the 3° glidepath (unless you come in way steeper). Settings are at full RPM (prop full in), around 15" manifold on final to maintain roughly 75kts, no extra payload except the pilot.
Any tips on how to properly execute a nice and stable approach and if this is normal for a V35B?
Cheers.
Bonanza trim effectiveness
- Lufthansa 380
- Staff Sergeant
- Posts: 266
- Joined: 17 Oct 2011, 16:46
- Location: Frankfurt, Germany
Re: Bonanza trim effectiveness
Lufthansa 380 wrote:So I did a couple circuits in the 'Bo and noticed that once on final and in landing configuration even full nose up trim does not give you a stable, force-free, approach. I still find myself applying back pressure to maintain the 3° glidepath (unless you come in way steeper). Settings are at full RPM (prop full in), around 15" manifold on final to maintain roughly 75kts, no extra payload except the pilot.
Any tips on how to properly execute a nice and stable approach and if this is normal for a V35B?
Cheers.
I'm noticing the same thing - it's as if I'm running out of nose up trim too soon. Gear and flaps out in the Bonanza certainly seems to really induce quite of bit of nose-down moment. I'm also wondering if using the A2A input configurator instead of the default P3D or FSUIPC assigned trim might yield better effectiveness.
- Lufthansa 380
- Staff Sergeant
- Posts: 266
- Joined: 17 Oct 2011, 16:46
- Location: Frankfurt, Germany
Re: Bonanza trim effectiveness
Don't see a real reson why that should be much different. I mean the trim and all the other stuff work per se. One option might be just not landing with full flap but maybe 20° instead.Hobart Escin wrote:Lufthansa 380 wrote:So I did a couple circuits in the 'Bo and noticed that once on final and in landing configuration even full nose up trim does not give you a stable, force-free, approach. I still find myself applying back pressure to maintain the 3° glidepath (unless you come in way steeper). Settings are at full RPM (prop full in), around 15" manifold on final to maintain roughly 75kts, no extra payload except the pilot.
Any tips on how to properly execute a nice and stable approach and if this is normal for a V35B?
Cheers.
I'm noticing the same thing - it's as if I'm running out of nose up trim too soon. Gear and flaps out in the Bonanza certainly seems to really induce quite of bit of nose-down moment. I'm also wondering if using the A2A input configurator instead of the default P3D or FSUIPC assigned trim might yield better effectiveness.
- Piper_EEWL
- Chief Master Sergeant
- Posts: 4544
- Joined: 26 Nov 2014, 14:14
- Location: Germany
Re: Bonanza trim effectiveness
I’m not experiencing the same behavior. I don’t run out of trim. What’s your load when you have that problem?
B377&COTS, J3 Cub, B-17G, Spitfire, P-40, P-51D, C172, C182, Pa28, Pa24, T-6 Texan, L-049&COTS, Bonanza V35B
- DHenriques_
- A2A Chief Pilot
- Posts: 5711
- Joined: 27 Mar 2009, 08:31
- Location: East Coast United States
Re: Bonanza trim effectiveness
I'm in FSX box using FSX settings with trim assigned to a button on the Hog. No trim issues at all really. Might be a bit slow on response but that's about all.
DH
DH
- Lufthansa 380
- Staff Sergeant
- Posts: 266
- Joined: 17 Oct 2011, 16:46
- Location: Frankfurt, Germany
Re: Bonanza trim effectiveness
Again, just the pilot and full-ish tanks.Piper_EEWL wrote:I’m not experiencing the same behavior. I don’t run out of trim. What’s your load when you have that problem?
- Piper_EEWL
- Chief Master Sergeant
- Posts: 4544
- Joined: 26 Nov 2014, 14:14
- Location: Germany
Re: Bonanza trim effectiveness
Is this new since the latest update? I’ll give it a try in my installation and see what happens.
B377&COTS, J3 Cub, B-17G, Spitfire, P-40, P-51D, C172, C182, Pa28, Pa24, T-6 Texan, L-049&COTS, Bonanza V35B
Re: Bonanza trim effectiveness
I have the latest update installed and I experience the same. My trim is fully nose up after landing and, even that, I had to hold the control wheel back to keep a good flare.
Not a big deal, but compared to others A2A airplanes looks like the Bo is very heavy on the nose.
Not a big deal, but compared to others A2A airplanes looks like the Bo is very heavy on the nose.
- Lufthansa 380
- Staff Sergeant
- Posts: 266
- Joined: 17 Oct 2011, 16:46
- Location: Frankfurt, Germany
Re: Bonanza trim effectiveness
Exactly that. Took me by surprise on the first approach. Trimming and trimming and trimming...nope still not enough...now it's full nose up....not enough.avduarri wrote:I have the latest update installed and I experience the same. My trim is fully nose up after landing and, even that, I had to hold the control wheel back to keep a good flare.
Not a big deal, but compared to others A2A airplanes looks like the Bo is very heavy on the nose.
Not a big deal for actually flying and landing it, just a bit unusual. Would love to hear Scott's take, since he flew that thing in real life.
Re: Bonanza trim effectiveness
This is what Scott said about trim on landing in this topic https://a2asimulations.com/forum/viewto ... 87#p498387
Scott - A2A wrote:The trim should work at all times.
70-75kts is too slow for final. On a typical approach, the trim will usually be about 9 degrees nose up.
Scott.
- Lufthansa 380
- Staff Sergeant
- Posts: 266
- Joined: 17 Oct 2011, 16:46
- Location: Frankfurt, Germany
Re: Bonanza trim effectiveness
Now that is interesting. I did find the listed 70-75kts to be a tad on the sluggish end by the feel of it. Will shoot some approaches with 80 and see how it goes.
Re: Bonanza trim effectiveness
I fly with just a mouse and keyboard, so while I can’t relate to the actual feel of the yoke with my current setup, I can visually see whether the yoke is centred for a particular trim based on the cursor on my screen.
At full flaps and gear down, And between 70 to 75 knots Vref, I don’t have issues with elevator authority on approach. However, it does require significant nose up trim (between 9-12 units) to keep my cursor centered (which is where you would feel the least pressure on the yoke).
I normally approach at around 80 knots, and bleed off to 70 over the threshold and it seems to work out ok (unless it’s gusty). I keep some power on until around 20 feet over the runway.
At full flaps and gear down, And between 70 to 75 knots Vref, I don’t have issues with elevator authority on approach. However, it does require significant nose up trim (between 9-12 units) to keep my cursor centered (which is where you would feel the least pressure on the yoke).
I normally approach at around 80 knots, and bleed off to 70 over the threshold and it seems to work out ok (unless it’s gusty). I keep some power on until around 20 feet over the runway.
Re: Bonanza trim effectiveness
Trim is affected by speed. What are the "correct" speeds for the various phases of landing a Bonanza? I found this discussion on the American Bonanza Society forum: https://www.bonanza.org/community/membe ... -settings/.
Here's a way for us armchair pilots to pound "the numbers" into our brains: https://www.bonanza.org/globalassets/bp ... -sheet.pdf.
Seeya
ATB
Here's a way for us armchair pilots to pound "the numbers" into our brains: https://www.bonanza.org/globalassets/bp ... -sheet.pdf.
Seeya
ATB
Last edited by Paughco on 02 Oct 2018, 10:36, edited 1 time in total.
Re: Bonanza trim effectiveness
Great find - thanks...Paughco wrote:Trim is affected by speed. What are the "correct" speeds for the various phases of landing a Bonanza? I found this discussion on the American Bonanza Society forum: https://www.bonanza.org/community/membe ... -settings/.
Seeya
ATB
Yeah - 80 knot Bonanza approaches are what I learned from the Lou’s Dreamfleet A36... I flew that one a bunch...
Regards,
Scott
Sent from my iPad using Tapatalk
- Lufthansa 380
- Staff Sergeant
- Posts: 266
- Joined: 17 Oct 2011, 16:46
- Location: Frankfurt, Germany
Re: Bonanza trim effectiveness
Great stuff guys! 80kts does seem to make more sense then. I mean, why is 70 the one in the manuals/the one that is recommended anyway?
Who is online
Users browsing this forum: No registered users and 16 guests