Good Afternoon,
My last 2 approaches have sent me into a death spiral when going full flaps. 1 flap comes out - the other stays in .
Any ideas why this is happening?
Below 120 knots
Jon
1 flap stuck on approach
-
- Senior Master Sergeant
- Posts: 2287
- Joined: 05 Nov 2013, 10:48
- Location: Oksboel, Denmark
Re: 1 flap stuck on approach
Hi Jon
Welcome to the world of Accu-Sim
Did you find anything during your walk around before the first time?
Did you go to the hangar to repair it after the first time?
Welcome to the world of Accu-Sim
Did you find anything during your walk around before the first time?
Did you go to the hangar to repair it after the first time?
Kind Regards
Tomas
Sim: FSX SE
Accu-Sim aircraft in my hangar:
C172, C182, P51 Civ, P51 Mil, B17, Spitfire, P47, B377 COTS,
J3 Cub, T6, Connie, P-40, V35B
A2A Accu-Sim Avro Lancaster Loading:............0.000003% complete, please wait.
Tomas
Sim: FSX SE
Accu-Sim aircraft in my hangar:
C172, C182, P51 Civ, P51 Mil, B17, Spitfire, P47, B377 COTS,
J3 Cub, T6, Connie, P-40, V35B
A2A Accu-Sim Avro Lancaster Loading:............0.000003% complete, please wait.
-
- Senior Master Sergeant
- Posts: 2439
- Joined: 15 Mar 2016, 08:23
Re: 1 flap stuck on approach
Hi Jon.
Further to what tomas has stated , on the V35 hangar , you have to hit the inspect button to show any faults , before you can fix them , and the questions you need to ask are .
1/ did the flaps pass a preflight check
2/ was there any extra flap play on one of the flaps , indicating ware
3/ did the flaps get lowered at to higher speed , causing a linkage to break
I have had a flap failure one one side , and survived , due to a quick response to bring flap back up so both wings had same degree of flap , but i have track IR so can do a quick glance left and right on flap deployment , to check if i have a flap issue , and get the flaps at same level.
regards alan.
Further to what tomas has stated , on the V35 hangar , you have to hit the inspect button to show any faults , before you can fix them , and the questions you need to ask are .
1/ did the flaps pass a preflight check
2/ was there any extra flap play on one of the flaps , indicating ware
3/ did the flaps get lowered at to higher speed , causing a linkage to break
I have had a flap failure one one side , and survived , due to a quick response to bring flap back up so both wings had same degree of flap , but i have track IR so can do a quick glance left and right on flap deployment , to check if i have a flap issue , and get the flaps at same level.
regards alan.
Re: 1 flap stuck on approach
ThankTomas Linnet wrote: ↑22 Jan 2022, 16:53 Hi Jon
Welcome to the world of Accu-Sim
Did you find anything during your walk around before the first time?
Did you go to the hangar to repair it after the first time?
Nothing on the walk and after the first issue (prop was destroyed) rebuilt everything but the engine.
Re: 1 flap stuck on approach
Hi Alan,alan CXA651 wrote: ↑22 Jan 2022, 17:31 Hi Jon.
Further to what tomas has stated , on the V35 hangar , you have to hit the inspect button to show any faults , before you can fix them , and the questions you need to ask are .
1/ did the flaps pass a preflight check
2/ was there any extra flap play on one of the flaps , indicating ware
3/ did the flaps get lowered at to higher speed , causing a linkage to break
I have had a flap failure one one side , and survived , due to a quick response to bring flap back up so both wings had same degree of flap , but i have track IR so can do a quick glance left and right on flap deployment , to check if i have a flap issue , and get the flaps at same level.
regards alan.
1) yes
2) Not that I noticed - freshly rebuilt
3) Quite possibly, I do know that I was doing 170 on my way down, ended the flight before I hit lol.
Inspection also told me I had oil pressure issues and main bearing wear so also rebuilt the engine with less than 10 hours. I spent about $50K in repairs since purchase a week or 2 ago.
I have to say that I am not normally a GA guy but Stevie motivated me and I'm really enjoying this plane.
-
- Staff Sergeant
- Posts: 294
- Joined: 13 Sep 2009, 10:41
- Location: Woodlands, Texas
Re: 1 flap stuck on approach
I've had four occurrences of the V35 asymmetrical flap extension, resulting in three recoveries and one catastrophe on short final.
As soon as possible, I go to flaps up or min flaps so roll can be managed; hopefully. As previously stated, walk-around and hangar maintenance check is a must.
As soon as possible, I go to flaps up or min flaps so roll can be managed; hopefully. As previously stated, walk-around and hangar maintenance check is a must.
Re: 1 flap stuck on approach
There seems to be some other underlying issues:
1) the Bonanza input configurator breaks the flaps completely - no input from Bravo or plane
2) P3D flaps increm allows full up or full down - on the Bravo and on the plane.
I believe it was pilot error not understanding that the flaps switch has no middle detent and you have to manually stop the flaps in flight. I am going to assume that I used full flaps over max allowed speed.
1) the Bonanza input configurator breaks the flaps completely - no input from Bravo or plane
2) P3D flaps increm allows full up or full down - on the Bravo and on the plane.
I believe it was pilot error not understanding that the flaps switch has no middle detent and you have to manually stop the flaps in flight. I am going to assume that I used full flaps over max allowed speed.
Who is online
Users browsing this forum: No registered users and 30 guests