My DME gauge seems to be showing numbers outside the gauge
DME gauge not sidplaying information centered
- Fragmentum
- Staff Sergeant
- Posts: 288
- Joined: 19 Jan 2005, 09:24
- Location: Montana Nomad
- Contact:
DME gauge not sidplaying information centered
i5-2600K SB, 8GB Mushkin Redline, ASUS P8Z68-V Pro, GTX 560 2GB, Saitek X52. Etch-A-Sketch hard wired to Speak-N-Spell backup system. Everything maxed and I see it ALL!
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: DME gauge not sidplaying information centered
Fragmentum,
Are you using FSX?
If so, it might be worth checking that the "high-resolution 3-D virtual cockpit" box is ticked in the "aircraft" tab of the display settings.
Thanks,
Nick
Are you using FSX?
If so, it might be worth checking that the "high-resolution 3-D virtual cockpit" box is ticked in the "aircraft" tab of the display settings.
Thanks,
Nick
- Fragmentum
- Staff Sergeant
- Posts: 288
- Joined: 19 Jan 2005, 09:24
- Location: Montana Nomad
- Contact:
Re: DME gauge not sidplaying information centered
Thank you Nick. I use FSX SP2 and did find "high-resolution 3-D virtual cockpit" unchecked. I did check it but upon saving the change I get a CTD 'Fatal error" and sim does a reload. Tried a different saved flight and same thing happens. Also tried "end flight" to default screen and rechecked "high-resolution 3-D virtual cockpit". Still get CTD and auto reload.Nick - A2A wrote:Fragmentum,
Are you using FSX?
If so, it might be worth checking that the "high-resolution 3-D virtual cockpit" box is ticked in the "aircraft" tab of the display settings.
Thanks,
Nick
i5-2600K SB, 8GB Mushkin Redline, ASUS P8Z68-V Pro, GTX 560 2GB, Saitek X52. Etch-A-Sketch hard wired to Speak-N-Spell backup system. Everything maxed and I see it ALL!
- Fragmentum
- Staff Sergeant
- Posts: 288
- Joined: 19 Jan 2005, 09:24
- Location: Montana Nomad
- Contact:
Re: DME gauge not sidplaying information centered
My GPS400 screen also shows a rather dim display
i5-2600K SB, 8GB Mushkin Redline, ASUS P8Z68-V Pro, GTX 560 2GB, Saitek X52. Etch-A-Sketch hard wired to Speak-N-Spell backup system. Everything maxed and I see it ALL!
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: DME gauge not sidplaying information centered
Okay, thanks for the added info. Please can you restart the sim and then select a default aircraft before ticking the "high-resolution 3-D virtual cockpit" box. This should fix the font scaling issue without the CTD.
Cheers,
Nick
Cheers,
Nick
- Fragmentum
- Staff Sergeant
- Posts: 288
- Joined: 19 Jan 2005, 09:24
- Location: Montana Nomad
- Contact:
Re: DME gauge not sidplaying information centered
Thanks Nick, that fixed it, now to fix the blurry dashboard scriptsNick - A2A wrote:Okay, thanks for the added info. Please can you restart the sim and then select a default aircraft before ticking the "high-resolution 3-D virtual cockpit" box. This should fix the font scaling issue without the CTD.
Cheers,
Nick
i5-2600K SB, 8GB Mushkin Redline, ASUS P8Z68-V Pro, GTX 560 2GB, Saitek X52. Etch-A-Sketch hard wired to Speak-N-Spell backup system. Everything maxed and I see it ALL!
- Fragmentum
- Staff Sergeant
- Posts: 288
- Joined: 19 Jan 2005, 09:24
- Location: Montana Nomad
- Contact:
Re: DME gauge not sidplaying information centered
I had previously changed the TEXTURE_MAX_LOAD=4096 from TEXTURE_MAX_LOAD=1024 but did not realize it would change back to 1024 when changing display settings.Fragmentum wrote:Thanks Nick, that fixed it, now to fix the blurry dashboard scriptsNick - A2A wrote:Okay, thanks for the added info. Please can you restart the sim and then select a default aircraft before ticking the "high-resolution 3-D virtual cockpit" box. This should fix the font scaling issue without the CTD.
Cheers,
Nick
I should take the time to learn what and how the DME gauge is used!!!
i5-2600K SB, 8GB Mushkin Redline, ASUS P8Z68-V Pro, GTX 560 2GB, Saitek X52. Etch-A-Sketch hard wired to Speak-N-Spell backup system. Everything maxed and I see it ALL!
Re: DME gauge not sidplaying information centered
Highly recommend trying the alternate FSX textures. They work wonderfully for our slightly dated software
- Fragmentum
- Staff Sergeant
- Posts: 288
- Joined: 19 Jan 2005, 09:24
- Location: Montana Nomad
- Contact:
Re: DME gauge not sidplaying information centered
How do I obtain/install them at this stage?flapman wrote:Highly recommend trying the alternate FSX textures. They work wonderfully for our slightly dated software
Thanks
i5-2600K SB, 8GB Mushkin Redline, ASUS P8Z68-V Pro, GTX 560 2GB, Saitek X52. Etch-A-Sketch hard wired to Speak-N-Spell backup system. Everything maxed and I see it ALL!
- Fragmentum
- Staff Sergeant
- Posts: 288
- Joined: 19 Jan 2005, 09:24
- Location: Montana Nomad
- Contact:
Re: DME gauge not sidplaying information centered
How do I obtain/install them at this stage?flapman wrote:Highly recommend trying the alternate FSX textures. They work wonderfully for our slightly dated software
I read that changing TEXTURE_MAX_LOAD= to 4096 contributes OOM issues.
Thanks
i5-2600K SB, 8GB Mushkin Redline, ASUS P8Z68-V Pro, GTX 560 2GB, Saitek X52. Etch-A-Sketch hard wired to Speak-N-Spell backup system. Everything maxed and I see it ALL!
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: DME gauge not sidplaying information centered
Hi Fragmentum,
Here's a direct link to the no-mipmap texture pack for the FSX Bonanza on the store:
https://a2asimulations.com/product/bona ... tures-fsx/
It's free - it's just that placing it on the store page works best in terms of providing a reliable and secure download location.
Thanks,
Nick
Here's a direct link to the no-mipmap texture pack for the FSX Bonanza on the store:
https://a2asimulations.com/product/bona ... tures-fsx/
It's free - it's just that placing it on the store page works best in terms of providing a reliable and secure download location.
Thanks,
Nick
Who is online
Users browsing this forum: No registered users and 20 guests