Is the fuel tank selector ever going to be fixed?
As it is, when it is switched, it only changes the GAUGE not the draw. So even if you have tank 2 selected (as an example) the gauge tells you how much fuel is in tank 2 but the sim still draws from tank 1 until it is exhausted, then it draws from tank 2 etc......
I asked about this a few months ago and never got a response concerning it (I don't think.....)
Fuel Tank selector
-
- Senior Airman
- Posts: 112
- Joined: 10 Oct 2005, 15:45
Fuel Tank selector
BM357_TinMan
My planes of interest:
109E4
P51B/C/D
Would love to see WoP planes in X-Plane
My planes of interest:
109E4
P51B/C/D
Would love to see WoP planes in X-Plane
Hi. Pop up 2D panel for fuel controling (shift+6). Two things there:
1. Operate the fuel selector to choose the feeding tank.
2. Operate the gauge switch to choose the content to measure. The upper scale is for rear tank while the lower sclae is for front tank. Or read the tooltip.
regards
ROB
1. Operate the fuel selector to choose the feeding tank.
2. Operate the gauge switch to choose the content to measure. The upper scale is for rear tank while the lower sclae is for front tank. Or read the tooltip.
regards
ROB
A2A Simulations Inc.
-
- Senior Airman
- Posts: 112
- Joined: 10 Oct 2005, 15:45
is the feeder switch not modeled in the V/C? I know the gauge switch is because that is teh one that is slightly hidden under the left side of the panel, but is teh feeder not modeled then?
If it is modeled in the V/C, where can I find it. Thanks
If it is modeled in the V/C, where can I find it. Thanks
BM357_TinMan
My planes of interest:
109E4
P51B/C/D
Would love to see WoP planes in X-Plane
My planes of interest:
109E4
P51B/C/D
Would love to see WoP planes in X-Plane
Who is online
Users browsing this forum: No registered users and 7 guests