Hi everybody! Coming back to FSX-SE after several years away (a story in itself.) I ran all the A2A updates and updated FSUIPC, AS16, and PRO-ATC/X 1.9.2.5.)
I'm having an issue with receiving replies from clearance delivery. I set up at the airport and parking spot per flightplan, start PRO-ATC/X, hit Go Fly and get the green banner in FSX. My coms are set up and get the PRO-ATC/X ATIS. I switch from standby to active on com1 which is set up by PRO-ATC/X. I request clearance but get no reply. If anyone has read my PRO-ATC/X First impressions post from 2015 - viewtopic.php?t=48343 - I did try the Checklist Menu but still got no reply from clearance.
I repeated this with the default C172 and got a reply and was able to request push-back and startup.
I posted on the PROATC forum and I'm waiting on a reply. If anyone here is using PRO-ATC/X and has any feedback, I'd appreciate it.
Jim
PRO-ATC/X Clearance issue
- renaissanceman
- Technical Sergeant
- Posts: 597
- Joined: 13 Apr 2008, 08:29
- Location: Bedford, Texas
PRO-ATC/X Clearance issue
i7-6700K @ 4.0 GHz | ASUS Maximus VIII Formula | 32 GB DDR4 | EVGA GeForce GTX 980TI Classified |
Win 10 Pro 64 | FSX SE | Registered FSUIPC | All Accu-Sim Birds | Accu-Feel v2 | TrackIR5 | AS16 | PRO-ATC/X
Win 10 Pro 64 | FSX SE | Registered FSUIPC | All Accu-Sim Birds | Accu-Feel v2 | TrackIR5 | AS16 | PRO-ATC/X
-
- Senior Master Sergeant
- Posts: 2439
- Joined: 15 Mar 2016, 08:23
Re: PRO-ATC/X Clearance issue
Hi Jim.
I dont have the PRO-ATC/X addon , so if i understand your issue correctly , the default C172 worked with the addon , but none of your A2A aircraft work with it .
1/ Which A2A aircraft do you have
Reason for asking , the warbirds and the T-6 dont have stby coms . the GA aircraft do , if you could list the A2A aircraft your haveing issues with , it will help A2A to figure out what is happening.
regards Alan.
I dont have the PRO-ATC/X addon , so if i understand your issue correctly , the default C172 worked with the addon , but none of your A2A aircraft work with it .
1/ Which A2A aircraft do you have
Reason for asking , the warbirds and the T-6 dont have stby coms . the GA aircraft do , if you could list the A2A aircraft your haveing issues with , it will help A2A to figure out what is happening.
regards Alan.
- renaissanceman
- Technical Sergeant
- Posts: 597
- Joined: 13 Apr 2008, 08:29
- Location: Bedford, Texas
Re: PRO-ATC/X Clearance issue
Hi Alan,alan CXA651 wrote: ↑13 Apr 2021, 16:11 Hi Jim.
I dont have the PRO-ATC/X addon , so if i understand your issue correctly , the default C172 worked with the addon , but none of your A2A aircraft work with it .
1/ Which A2A aircraft do you have
Reason for asking , the warbirds and the T-6 dont have stby coms . the GA aircraft do , if you could list the A2A aircraft your haveing issues with , it will help A2A to figure out what is happening.
regards Alan.
As it says in my sig, I have all the accusim birds. I have only tried the Comanche and the C182 and neither one worked. I don't expect to fly IFR with the warbirds. In the past, I believe I flew either the Constellation or the B377 using PRO-ATC/X, but most of my previous flights were with the Comanche.
i7-6700K @ 4.0 GHz | ASUS Maximus VIII Formula | 32 GB DDR4 | EVGA GeForce GTX 980TI Classified |
Win 10 Pro 64 | FSX SE | Registered FSUIPC | All Accu-Sim Birds | Accu-Feel v2 | TrackIR5 | AS16 | PRO-ATC/X
Win 10 Pro 64 | FSX SE | Registered FSUIPC | All Accu-Sim Birds | Accu-Feel v2 | TrackIR5 | AS16 | PRO-ATC/X
- renaissanceman
- Technical Sergeant
- Posts: 597
- Joined: 13 Apr 2008, 08:29
- Location: Bedford, Texas
Re: PRO-ATC/X Clearance issue
I thought I should update this post - I was able to resolve the issue with clearance delivery. I seems PATC gets confused with the A2A radio setup. If I use the Shift-6 Quick Radio panel initially then I get a response from clearance delivery. After that I am able to enter and change frequencies using the cockpit radio stack or the Quick Radio panel without problems. Here is the thread from the PATC forum:renaissanceman wrote: ↑13 Apr 2021, 14:18 I'm having an issue with receiving replies from clearance delivery. I set up at the airport and parking spot per flightplan, start PRO-ATC/X, hit Go Fly and get the green banner in FSX. My coms are set up and get the PRO-ATC/X ATIS. I switch from standby to active on com1 which is set up by PRO-ATC/X. I request clearance but get no reply. If anyone has read my PRO-ATC/X First impressions post from 2015 - viewtopic.php?t=48343 - I did try the Checklist Menu but still got no reply from clearance.
Jim
https://www.pointsoftware.de/proatcxfor ... 063.0.html
The current problem I am having is I cannot save and later load a 'saved flight situation' through PATC. Apparently the issue is with the code as it relates to FSX and it is currently in the developer's hands. Here is the thread from the PATC forum:
https://www.pointsoftware.de/proatcxfor ... 095.0.html
Jim
i7-6700K @ 4.0 GHz | ASUS Maximus VIII Formula | 32 GB DDR4 | EVGA GeForce GTX 980TI Classified |
Win 10 Pro 64 | FSX SE | Registered FSUIPC | All Accu-Sim Birds | Accu-Feel v2 | TrackIR5 | AS16 | PRO-ATC/X
Win 10 Pro 64 | FSX SE | Registered FSUIPC | All Accu-Sim Birds | Accu-Feel v2 | TrackIR5 | AS16 | PRO-ATC/X
- renaissanceman
- Technical Sergeant
- Posts: 597
- Joined: 13 Apr 2008, 08:29
- Location: Bedford, Texas
Re: PRO-ATC/X Clearance issue
I thought I should update this post - I was able to resolve the issue with clearance delivery. I seems PATC gets confused with the A2A radio setup. If I use the Shift-6 Quick Radio panel initially then I get a response from clearance delivery. After that I am able to enter and change frequencies using the cockpit radio stack or the Quick Radio panel without problems. Here is the thread from the PATC forum:
https://www.pointsoftware.de/proatcxfor ... 063.0.html
The current problem I am having is I cannot save and later load a 'saved flight situation' through PATC. Apparently the issue is with the code as it relates to FSX and it is currently in the developer's hands. Here is the thread from the PATC forum:
https://www.pointsoftware.de/proatcxfor ... 095.0.html
Jim
[/quote]
I resolved the issue with Saved Flight Situations - I had the wrong directory in the 'Options/Flight Plan Folders' tab. What was listed there was:
G:\Users\Jim\Documents\Flight Simulator X Files - Copy (2)\Plan-G Plans
Somehow when I update or reinstall PATCX, this path is in the 'Options/Flight Plan Folders' tab.
I changed this to:
\Users\Jim\Documents\Flight Simulator X Files Which is where my saved flights go.
I also added:
\Users\Jim\Documents\Flight Simulator X Files\Plan-G Plans Where I store my flight plans.
It's a bit confusing because the entry in the Flight Plan Folders' tab is listed as 'Paths where Flight Simulator flight plans(*.pln) are saved. Plus additional add-ons.' The path should point to where the saved flights are and possibly flight plan storage as well. This could be a language issue - the developer is German.
Anyway, it all seems to be working now and is improved from when I was using ProATC/X a few years ago.
Jim
i7-6700K @ 4.0 GHz | ASUS Maximus VIII Formula | 32 GB DDR4 | EVGA GeForce GTX 980TI Classified |
Win 10 Pro 64 | FSX SE | Registered FSUIPC | All Accu-Sim Birds | Accu-Feel v2 | TrackIR5 | AS16 | PRO-ATC/X
Win 10 Pro 64 | FSX SE | Registered FSUIPC | All Accu-Sim Birds | Accu-Feel v2 | TrackIR5 | AS16 | PRO-ATC/X
Who is online
Users browsing this forum: No registered users and 33 guests