Hi all,
Did someone give a try to configure the lights for the Wilco/Feelthere EJET 170/190???
Regards and tks in advance!!!
Fábio
WILCO/FEELTHERE EJET-170/190
EJETS and 3D Lights Redux
Here is my work
first is the 170
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -57.60, 0.50, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.95, fx_shockwave_beacon_rotating_red ,
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=3, -14.20, -40.00, 0.00, fx_schockwave_navred ,
light.6=3, -14.20, 40.00, 0.00, fx_schockwave_navgre ,
light.7=2, -18.80, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -18.80, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9 = 5, 6.500, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10 = 5, 6.500, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.11 = 6, 28.000, 0.60, -8.0, fx_Shockwave_landing_light_narrow // Shockwave light
next is my version of the 190
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -69.70, 0.50, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.95, fx_shockwave_beacon_rotating_red ,
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=3, -14.20, -40.00, 0.00, fx_schockwave_navred ,
light.6=3, -14.20, 40.00, 0.00, fx_schockwave_navgre ,
light.7=2, -20.50, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -20,50, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9 = 5, 6.500, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10 = 5, 6.500, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.11 = 6, 35.000, 0.20, -7.0, fx_Shockwave_landing_light_narrow // Shockwave light
make sure you add the lines to the panels
gauge13=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge14=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light
cheers
first is the 170
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -57.60, 0.50, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.95, fx_shockwave_beacon_rotating_red ,
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=3, -14.20, -40.00, 0.00, fx_schockwave_navred ,
light.6=3, -14.20, 40.00, 0.00, fx_schockwave_navgre ,
light.7=2, -18.80, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -18.80, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9 = 5, 6.500, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10 = 5, 6.500, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.11 = 6, 28.000, 0.60, -8.0, fx_Shockwave_landing_light_narrow // Shockwave light
next is my version of the 190
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -69.70, 0.50, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.95, fx_shockwave_beacon_rotating_red ,
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=3, -14.20, -40.00, 0.00, fx_schockwave_navred ,
light.6=3, -14.20, 40.00, 0.00, fx_schockwave_navgre ,
light.7=2, -20.50, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -20,50, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9 = 5, 6.500, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10 = 5, 6.500, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.11 = 6, 35.000, 0.20, -7.0, fx_Shockwave_landing_light_narrow // Shockwave light
make sure you add the lines to the panels
gauge13=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge14=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light
cheers
Hi Knowlesc!!
Great work you have done my friend!!!!!!!!!!!!!!!!!!!
I've made some little changes in your configs (in red). I changed the code number for the nav lights to have them light up (the same occures with the Digital F-70/-100). I have also repositioned the nav lights in the wing (in the EJET 190) and have the tail strobe centered (both). Changed the hight of the lower beacon rotating light. Also put backwards the wing landing lights and disabled the nose light, because they don't desappear with landing gear up. See what you think about those little changes to your fantastic configuration.
EJET 170
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -57.60, 0.00, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.35, fx_shockwave_beacon_rotating_red , //-6.95
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=9, -14.20, -40.00, 0.00, fx_shockwave_navred,
light.6=9, -14.20, 40.00, 0.00, fx_shockwave_navgre,
light.7=2, -18.80, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -18.80, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9=5, 5.000, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10=5, 5.000, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
//light.11=6, 27.550, 0.60, -8.0, fx_Shockwave_landing_light_narrow // Shockwave light
EJET 190
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -69.70, 0.00, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.35, fx_shockwave_beacon_rotating_red ,
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=9, -14.50, -40.90, 0.00, fx_shockwave_navred,
light.6=9, -14.50, 40.90, 0.00, fx_shockwave_navgre,
light.7=2, -20.50, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -20,50, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9 = 5, 5.000, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10 = 5, 5.000, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
//light.11 = 6, 35.000, 0.20, -7.0, fx_Shockwave_landing_light_narrow // Shockwave light
All the best!!
Fábio
Great work you have done my friend!!!!!!!!!!!!!!!!!!!
I've made some little changes in your configs (in red). I changed the code number for the nav lights to have them light up (the same occures with the Digital F-70/-100). I have also repositioned the nav lights in the wing (in the EJET 190) and have the tail strobe centered (both). Changed the hight of the lower beacon rotating light. Also put backwards the wing landing lights and disabled the nose light, because they don't desappear with landing gear up. See what you think about those little changes to your fantastic configuration.
EJET 170
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -57.60, 0.00, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.35, fx_shockwave_beacon_rotating_red , //-6.95
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=9, -14.20, -40.00, 0.00, fx_shockwave_navred,
light.6=9, -14.20, 40.00, 0.00, fx_shockwave_navgre,
light.7=2, -18.80, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -18.80, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9=5, 5.000, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10=5, 5.000, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
//light.11=6, 27.550, 0.60, -8.0, fx_Shockwave_landing_light_narrow // Shockwave light
EJET 190
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -69.70, 0.00, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.35, fx_shockwave_beacon_rotating_red ,
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=9, -14.50, -40.90, 0.00, fx_shockwave_navred,
light.6=9, -14.50, 40.90, 0.00, fx_shockwave_navgre,
light.7=2, -20.50, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -20,50, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9 = 5, 5.000, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10 = 5, 5.000, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
//light.11 = 6, 35.000, 0.20, -7.0, fx_Shockwave_landing_light_narrow // Shockwave light
All the best!!
Fábio
Re: WILCO/FEELTHERE EJET-170/190
Guys, do these lights work in P3Dv4? Do they illuminate ground at night?
Thanks.
Thanks.
Who is online
Users browsing this forum: No registered users and 25 guests