Carenado B1900D

[bumblebee]

Has anyone done the lights config for this aircraft?
Thanks

[northtexas]

Has anyone done the lights config for this aircraft?
Thanks

I found this at AVSIM which works for me:

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 4, 16.3, 0.0, 2.00, fx_vclightcarmnd
light.1 = 10, 12.2, 0.00, 2.00, fx_vclightcarmndpl

light.2 = 4, 5.0, 0.00, 3.00, fx_vclightcarmndpl2
light.3 = 4, 0.5, 0.00, 3.00, fx_vclightcarmndpl2
light.4 = 4, -2.5, 0.00, 3.00, fx_vclightcarmndpl2
light.5 = 4, -5.5, 0.00, 3.00, fx_vclightcarmndpl2
light.6 = 3, -0.980, -27.830, 1.502, fx_shockwave_navred , //Nav Left
light.7 = 3, -0.749, -27.831, 1.472, fx_shockwave_navred , //Nav Left
light.8 = 3, -0.980, 27.830, 1.502, fx_shockwave_navgre , //Nav Right
light.9 = 3, -0.749, 27.831, 1.472, fx_shockwave_navgre , //Nav Right
light.10 = 3, -36.030, 0.000, 10.248, fx_shockwave_navwhi ,//Position Rear
light.11 = 3, -36.030, 0.000, 10.228, fx_shockwave_navwhi ,//Position Rear
light.12 = 6, 22.158, 0.00, -2.000, fx_Shockwave_landing_light_small_xenon // Shockwave
light.13 = 5, 2.258, 10.10, 0.000, fx_shockwave_landing_light_narrow //shockwave light
light.14 = 5, 2.258, -10.10, 0.000, fx_shockwave_landing_light_narrow //shockwave light
light.15 = 2, -2.480, -28.950, 2.000, fx_shockwave_strobe_l , //Strobe Left
light.16 = 2, -2.480, 28.950, 2.000, fx_shockwave_strobe_l , //Strobe Right
light.17 = 2, -7.475, 0.00, -2.160, Fx_shockwave_strobe_l , // Shockwave light









[Vcockpit01]



gauge14=shockwave_lights!SW Lights_gear, 1,1,1,1 //shockwave light

[flugkapitan]

Thanks for posting that! They do look good.

Now if I could only find the settings for the Shockwave lights for the Metroliner...

Cheers,
Scott