After insert the following and necessary line in the panel CFG the Landing light switch in the VC cockpit works not correctly. Push to ON and the switch jumps immediately to the OFF position! Any ideas?
This is the line in the panel cfg
gauge49=shockwave_lights!SW Lights_gear, 1,1,1,1 //shockwave light
Cheers
Max
QW 757
-
- Airman Basic
- Posts: 3
- Joined: 21 Sep 2020, 05:04
Re: QW 757
I have the same issue..we have to live with this unfortunately....its like as soon as gear retracted landing lights will be off....and cant control the switch anymore through overhead panel...if we dont add that line in panel.cfg/..then the lights will remain hanging in air!
-
- Airman Basic
- Posts: 6
- Joined: 03 Oct 2020, 11:54
- Location: Jacksonville, fla
Re: QW 757
If you can locate the line for the actual landing light and remove it this will go away . Problem here is a lot of aircraft use what are called CAB file to keep all of the gauges in and it makes it hard to remove one gauge.
I have a program called FS PANEL STUDIO that allows you to edit gauges in any of your aircraft I used this program and simply removed the switch from the panel. Issue solved
Be careful because some time all of the light switches may disappear and if that is the case you are stuck with it. The only other option is to completely replace the entire gauge.
I have a program called FS PANEL STUDIO that allows you to edit gauges in any of your aircraft I used this program and simply removed the switch from the panel. Issue solved
Be careful because some time all of the light switches may disappear and if that is the case you are stuck with it. The only other option is to completely replace the entire gauge.
Who is online
Users browsing this forum: No registered users and 34 guests