Starting from the water

Post any technical issues here. This forum gets priority from our staff.
new reply
User avatar
YoYo
Staff Sergeant
Posts: 256
Joined: 21 Sep 2004, 02:28
Location: Poland
Contact:

Starting from the water

Post by YoYo »

Hi,
most often I fly between airports and save the flight (in Cold and Dark situation). Next day I start from this point ect.

BUT with float plane version pf J3 its a "horror". When I load saved flight (when Im on the water) my Cub starts to dancing (very fast turnover) what is very annoying.

Any idea?

I didnt notice the same with other float plane.
http://yoyosims.pl/
Image
W10, i9 9900K, RTX 3090, RAM32Gb Corsair Vengeance LED OC@3200MHz, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] HP Reverb v2, VR fly only

Caldemeyn
Master Sergeant
Posts: 1101
Joined: 01 Feb 2011, 11:21
Location: Poland

Re: Starting from the water

Post by Caldemeyn »

Pewnie zapisany stan sima ci coś bruździ :wink: dzieje się tak jak ładujesz normalnie ?
Ja wychodzę z założenia że nie ma sensu używać save'ów, psują coś praktycznie przy każdym zewnętrznym dodatku.

User avatar
YoYo
Staff Sergeant
Posts: 256
Joined: 21 Sep 2004, 02:28
Location: Poland
Contact:

Re: Starting from the water

Post by YoYo »

Caldemeyn wrote: 18 Jan 2020, 13:00 Pewnie zapisany stan sima ci coś bruździ :wink: dzieje się tak jak ładujesz normalnie ?
Ja wychodzę z założenia że nie ma sensu używać save'ów, psują coś praktycznie przy każdym zewnętrznym dodatku.
Jak ładuję normalnie to oczywiście nie, daję opcję "reload" model i jest ok nawet z tym save, ale z innymi modelami nie mam takie problemu na wodzie przy zrobieniu save :) .
http://yoyosims.pl/
Image
W10, i9 9900K, RTX 3090, RAM32Gb Corsair Vengeance LED OC@3200MHz, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] HP Reverb v2, VR fly only

Caldemeyn
Master Sergeant
Posts: 1101
Joined: 01 Feb 2011, 11:21
Location: Poland

Re: Starting from the water

Post by Caldemeyn »

Magia A2A nie znosi wszelkiego profanum :) . Złe fatum ściągacie waść. :mrgreen:

Pewnie jakiś moduł się nakłada albo nie ładuje ?

A jakich innych modeli z pływakami używasz ?

Fsuipc jest ?

level135.lp
Airman
Posts: 44
Joined: 10 Sep 2013, 05:01
Location: France
Contact:

Re: Starting from the water

Post by level135.lp »

I have exactly the same problem
:a2awhite:

level135.lp
Airman
Posts: 44
Joined: 10 Sep 2013, 05:01
Location: France
Contact:

Re: Starting from the water

Post by level135.lp »

But I don't understand polish :roll:
:a2awhite:

User avatar
YoYo
Staff Sergeant
Posts: 256
Joined: 21 Sep 2004, 02:28
Location: Poland
Contact:

Re: Starting from the water

Post by YoYo »

Caldemeyn wrote: 18 Jan 2020, 14:51 Magia A2A nie znosi wszelkiego profanum :) . Złe fatum ściągacie waść. :mrgreen:
Pewnie jakiś moduł się nakłada albo nie ładuje ?
A jakich innych modeli z pływakami używasz ?
Fsuipc jest ?
level135.lp wrote: 20 Jan 2020, 13:29 But I don't understand polish :roll:
So in English - for example with DHC-2 (Milviz), float version is OK.
What I noticed it is present when I saved a flight with "Tie downs" = ON option (what is correct after the flight). Wihtout this is near ok.
I'll check more about possibility of this tie downs, it affects or not for this issue.
http://yoyosims.pl/
Image
W10, i9 9900K, RTX 3090, RAM32Gb Corsair Vengeance LED OC@3200MHz, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] HP Reverb v2, VR fly only

level135.lp
Airman
Posts: 44
Joined: 10 Sep 2013, 05:01
Location: France
Contact:

Re: Starting from the water

Post by level135.lp »

Thank's for the translation.
I have resolved this issue unistalling FSUIPC. My Cub on floats deosn't danse anymore o, the water when I load a saved flight.
Hoping this help.
:a2awhite:

User avatar
YoYo
Staff Sergeant
Posts: 256
Joined: 21 Sep 2004, 02:28
Location: Poland
Contact:

Re: Starting from the water

Post by YoYo »

level135.lp wrote: 21 Jan 2020, 12:25 Thank's for the translation.
I have resolved this issue unistalling FSUIPC. My Cub on floats deosn't danse anymore o, the water when I load a saved flight.
Hoping this help.
But FSUIPC is obligatory for most users including me....
http://yoyosims.pl/
Image
W10, i9 9900K, RTX 3090, RAM32Gb Corsair Vengeance LED OC@3200MHz, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] HP Reverb v2, VR fly only

Caldemeyn
Master Sergeant
Posts: 1101
Joined: 01 Feb 2011, 11:21
Location: Poland

Re: Starting from the water

Post by Caldemeyn »

You can try by the process of elimination, backup your fsuipc config file, delete it, check for problems. If the problem disappears then you have some info to base further checks on, fsuipc being the problem or not. If it is then the next thing i would go over would be the individual settings in your file, to check for conflicts, one by one.

If it isn't then we will be here :mrgreen:

I asked if you had it :P its on my "first things to check" list :wink:

new reply

Return to “Piper J-3 Cub Tech Support”

Who is online

Users browsing this forum: No registered users and 8 guests