How can I change the aircraft.cfg to read Imperial gallons instead of US gallons?
[fuel]
//Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons)
fuel_type = 1
number_of_tank_selectors = 1
electric_pump = 1
Center1 = 0.000, 0.000, 0.000, 57.600 , 0.000 //top
Center2 = 0.000, 0.000, -1.000, 44.400, 0.000 //bottom
//Center3 = 0.000, 0.000, -1.000, 204.161, 0.000 //jett
Center1 should read 48.000 and Center2 should read 37.000 Imp galls and in the Payload Manager everything is in Metric instead of pounds, feet and inches!
Any advice on how to correct this?
Regards
Nigel
US Gallons in Mk1 Spitfire
-
- Airman Basic
- Posts: 8
- Joined: 10 Sep 2018, 04:39
- Location: West Shropshire, UK
-
- Senior Master Sergeant
- Posts: 2286
- Joined: 05 Nov 2013, 10:48
- Location: Oksboel, Denmark
Re: US Gallons in Mk1 Spitfire
Best advise is to stay away from the .cfg file
here is a simple chart that can be used: https://flytag.co/jet-fuel-conversion.html
here is a simple chart that can be used: https://flytag.co/jet-fuel-conversion.html
Kind Regards
Tomas
Sim: FSX SE
Accu-Sim aircraft in my hangar:
C172, C182, P51 Civ, P51 Mil, B17, Spitfire, P47, B377 COTS,
J3 Cub, T6, Connie, P-40, V35B
A2A Accu-Sim Avro Lancaster Loading:............0.000003% complete, please wait.
Tomas
Sim: FSX SE
Accu-Sim aircraft in my hangar:
C172, C182, P51 Civ, P51 Mil, B17, Spitfire, P47, B377 COTS,
J3 Cub, T6, Connie, P-40, V35B
A2A Accu-Sim Avro Lancaster Loading:............0.000003% complete, please wait.
Re: US Gallons in Mk1 Spitfire
You should be using the Shift 4 menu to set fuel and fluids and, as Tomas said, stay away from the .cfg file. It doesn't work the same way in A2A aircraft. And I'm afraid you're stuck with Imperial gallons.
-
- Airman Basic
- Posts: 8
- Joined: 10 Sep 2018, 04:39
- Location: West Shropshire, UK
Re: US Gallons in Mk1 Spitfire
" And I'm afraid you're stuck with Imperial gallons."
You mean US Gallons, don't you? Its Imperial I want to change to.
You mean US Gallons, don't you? Its Imperial I want to change to.
Who is online
Users browsing this forum: No registered users and 23 guests